R58 Retrofit union jacks R58 coding
#1
11-17-2021, 10:09 AM
Retrofit union jacks R58 coding
Did a retrofit of tail light union jacks on a 2014 R58 mini.
Im having troubles disabling rear brake light errors. These are the only faults indicating.
Ive added FSW_PSW.trc read out from car. FRM software is FRM3_R56.C36, anyone can take a look at it and correct whats wrong and needed?
WARMUE_BL_M2_43_M2_9 and KALTUE_BL_M2_43_M2_9 was already set to "nicht_aktiv".
But still FRM indicates brake light faults in ISTA. CC_MELDUNG_BL only has got wert_01 to wert_04 values, would of thought this one shouldve been "nicht_aktiv" but according to NCS Dummy hex values are already "00,00".
Did also code the exact same parameters as retrofit of lci rear lights for BMW E89 series with same FRM module, but still fault shows up. Need desperate help!
Im having troubles disabling rear brake light errors. These are the only faults indicating.
Ive added FSW_PSW.trc read out from car. FRM software is FRM3_R56.C36, anyone can take a look at it and correct whats wrong and needed?
WARMUE_BL_M2_43_M2_9 and KALTUE_BL_M2_43_M2_9 was already set to "nicht_aktiv".
But still FRM indicates brake light faults in ISTA. CC_MELDUNG_BL only has got wert_01 to wert_04 values, would of thought this one shouldve been "nicht_aktiv" but according to NCS Dummy hex values are already "00,00".
Did also code the exact same parameters as retrofit of lci rear lights for BMW E89 series with same FRM module, but still fault shows up. Need desperate help!
#2
11-17-2021, 01:45 PM
Platinum Sponsor
We have Union Jack that fit the R58, no coding? https://www.ecstuning.com/b-helix-pa...oupe-cooper_s/
Maybe you did not get the correct ones or the pre 2011 versions?
Maybe you did not get the correct ones or the pre 2011 versions?
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
volksfragen
Electrical
5
02-05-2021 08:17 PM
qwertmonkey
Stock Problems/Issues
14
07-30-2006 08:51 AM