Drivetrain Tune and Exhaust = Done
#1
Tune and Exhaust = Done
Hi all!
I just recently got back from a 4,000 mile road trip in my 2012 CMS ALL4 to southern Florida and back up to Connecticut.
While in Miami, Performance Auto Works re-flashed the ECU, and after a Dyno test, the numbers were great! Around 207 hp and 250 lb/ft of torque... With no other mods!
A few days later in Orlando, MINI of Orlando put on the exhaust system... That consists of:
1) Akrapovic Downpipe: We did not get any check engine codes because of spacing out the bottom O2 sensor with an 18mm spark plug spacer (Still no light after almost 2,000 miles of driving)
2) JCW Midpipe, along with cutting out the silencer (Makes it a straight pipe to the back box)
3) Unmodified JCW backbox.
I'll post some photos of the install if you all would like.... For now here is the video on how it sounds:
http://www.youtube.com/watch?v=DGfNP...ideo&lr=1&ob=0
I just recently got back from a 4,000 mile road trip in my 2012 CMS ALL4 to southern Florida and back up to Connecticut.
While in Miami, Performance Auto Works re-flashed the ECU, and after a Dyno test, the numbers were great! Around 207 hp and 250 lb/ft of torque... With no other mods!
A few days later in Orlando, MINI of Orlando put on the exhaust system... That consists of:
1) Akrapovic Downpipe: We did not get any check engine codes because of spacing out the bottom O2 sensor with an 18mm spark plug spacer (Still no light after almost 2,000 miles of driving)
2) JCW Midpipe, along with cutting out the silencer (Makes it a straight pipe to the back box)
3) Unmodified JCW backbox.
I'll post some photos of the install if you all would like.... For now here is the video on how it sounds:
http://www.youtube.com/watch?v=DGfNP...ideo&lr=1&ob=0
#6
#7
Trending Topics
#12
Hi all!
I just recently got back from a 4,000 mile road trip in my 2012 CMS ALL4 to southern Florida and back up to Connecticut.
While in Miami, Performance Auto Works re-flashed the ECU, and after a Dyno test, the numbers were great! Around 207 hp and 250 lb/ft of torque... With no other mods!
A few days later in Orlando, MINI of Orlando put on the exhaust system... That consists of:
1) Akrapovic Downpipe: We did not get any check engine codes because of spacing out the bottom O2 sensor with an 18mm spark plug spacer (Still no light after almost 2,000 miles of driving)
2) JCW Midpipe, along with cutting out the silencer (Makes it a straight pipe to the back box)
3) Unmodified JCW backbox.
I'll post some photos of the install if you all would like.... For now here is the video on how it sounds:
http://www.youtube.com/watch?v=DGfNP...ideo&lr=1&ob=0
I just recently got back from a 4,000 mile road trip in my 2012 CMS ALL4 to southern Florida and back up to Connecticut.
While in Miami, Performance Auto Works re-flashed the ECU, and after a Dyno test, the numbers were great! Around 207 hp and 250 lb/ft of torque... With no other mods!
A few days later in Orlando, MINI of Orlando put on the exhaust system... That consists of:
1) Akrapovic Downpipe: We did not get any check engine codes because of spacing out the bottom O2 sensor with an 18mm spark plug spacer (Still no light after almost 2,000 miles of driving)
2) JCW Midpipe, along with cutting out the silencer (Makes it a straight pipe to the back box)
3) Unmodified JCW backbox.
I'll post some photos of the install if you all would like.... For now here is the video on how it sounds:
http://www.youtube.com/watch?v=DGfNP...ideo&lr=1&ob=0
Last edited by J Dubz; 02-24-2012 at 08:07 AM. Reason: more questions for kconner5
#13
im going to have mine done at Eurowise http://euro-wise.com/
this is what i was told on the pricing. "We can tune your Mini for $849 + $200 to pull out your ecu and ship it to get flashed with software. Takes about 3 to 4 days"
this is what i was told on the pricing. "We can tune your Mini for $849 + $200 to pull out your ecu and ship it to get flashed with software. Takes about 3 to 4 days"
#14
kconner5, Wow...... One of the better sounding exhausts so far
Did the shop who did the install supply the parts or did you purchase everything in advance? Approximate costs? Also how's it sounding from cockpit?
In Ct as well... Nice way to enjoy some ME time with your new Mini
Know of any shops in our area that could duplicate that install ?
Again, nice job
Did the shop who did the install supply the parts or did you purchase everything in advance? Approximate costs? Also how's it sounding from cockpit?
In Ct as well... Nice way to enjoy some ME time with your new Mini
Know of any shops in our area that could duplicate that install ?
Again, nice job
#16
Here is a cold start:
http://www.youtube.com/watch?v=mQA4zxpiaFs
PAW Website:
http://www.pawmotorsport.com/about-me/
Kyle
http://www.youtube.com/watch?v=mQA4zxpiaFs
PAW Website:
http://www.pawmotorsport.com/about-me/
Kyle
#19
Hi all!
I just recently got back from a 4,000 mile road trip in my 2012 CMS ALL4 to southern Florida and back up to Connecticut.
While in Miami, Performance Auto Works re-flashed the ECU, and after a Dyno test, the numbers were great! Around 207 hp and 250 lb/ft of torque... With no other mods!
A few days later in Orlando, MINI of Orlando put on the exhaust system... That consists of:
1) Akrapovic Downpipe: We did not get any check engine codes because of spacing out the bottom O2 sensor with an 18mm spark plug spacer (Still no light after almost 2,000 miles of driving)
2) JCW Midpipe, along with cutting out the silencer (Makes it a straight pipe to the back box)
3) Unmodified JCW backbox.
I'll post some photos of the install if you all would like.... For now here is the video on how it sounds:
http://www.youtube.com/watch?v=DGfNP...ideo&lr=1&ob=0
I just recently got back from a 4,000 mile road trip in my 2012 CMS ALL4 to southern Florida and back up to Connecticut.
While in Miami, Performance Auto Works re-flashed the ECU, and after a Dyno test, the numbers were great! Around 207 hp and 250 lb/ft of torque... With no other mods!
A few days later in Orlando, MINI of Orlando put on the exhaust system... That consists of:
1) Akrapovic Downpipe: We did not get any check engine codes because of spacing out the bottom O2 sensor with an 18mm spark plug spacer (Still no light after almost 2,000 miles of driving)
2) JCW Midpipe, along with cutting out the silencer (Makes it a straight pipe to the back box)
3) Unmodified JCW backbox.
I'll post some photos of the install if you all would like.... For now here is the video on how it sounds:
http://www.youtube.com/watch?v=DGfNP...ideo&lr=1&ob=0
Last edited by Mavryk03; 03-10-2012 at 03:30 PM.
#20
All the parts are listed in the first post. Check out Way Motor Works for the parts, and also go to www.countrymanmotoring.com and check out the second post which is Titled "Road trip + Mods"
If you haven't checked out the blog it's run by myself and Aaron and I'd love to hear everyone's feedback!
If you haven't checked out the blog it's run by myself and Aaron and I'd love to hear everyone's feedback!
#21
All the parts are listed in the first post. Check out Way Motor Works for the parts, and also go to www.countrymanmotoring.com and check out the second post which is Titled "Road trip + Mods"
If you haven't checked out the blog it's run by myself and Aaron and I'd love to hear everyone's feedback!
If you haven't checked out the blog it's run by myself and Aaron and I'd love to hear everyone's feedback!
#22
#23
Thanks! Subscribe to the YouTube channel because I will upload more videos on the car... I believe there are 3 now on the Countryman.
Just drove up to Vermont from connecticut as I do every weekend but this weekend MINI is sponsoring the Burton US open at my home mountain Stratton! Saw quite a few MINIs up here
Just drove up to Vermont from connecticut as I do every weekend but this weekend MINI is sponsoring the Burton US open at my home mountain Stratton! Saw quite a few MINIs up here
Thread
Thread Starter
Forum
Replies
Last Post
ECSTuning
Vendor Classifieds
7
01-04-2019 12:51 PM
ECSTuning
Vendor Announcements
0
08-12-2015 01:24 PM
ECSTuning
Vendor Classifieds
0
08-10-2015 02:03 PM