Help finding an aftermarket hose for part 11537629401
#1
Help finding an aftermarket hose for part 11537629401
I have a 2002 regular cooper and just started leaking from the radiator. Since I'm removing the radiator, I think it would be a VERY good idea to change the water pump, thermostat and the hoses, taking in consideration that this is a 14 year-old car and has almost 130,000 miles, I know is past due already.
I don't want to disassemble the front of the car again. I found the "water pipe" that goes from the pump to somewhere (I don't know yet), but I couldn't find any aftermarket replacement. The part number is 11537629401 and is the part #1 in the image.
I did search online and I can only find BMW/MINI genuine starting at $182...expensive! My car's trading value is about $1600, so I want to keep the cost as low as possible.
Open to suggestions. Thanx
I don't want to disassemble the front of the car again. I found the "water pipe" that goes from the pump to somewhere (I don't know yet), but I couldn't find any aftermarket replacement. The part number is 11537629401 and is the part #1 in the image.
I did search online and I can only find BMW/MINI genuine starting at $182...expensive! My car's trading value is about $1600, so I want to keep the cost as low as possible.
Open to suggestions. Thanx
#2
I understand your reasoning for updating the rubber hoses on your MINI, as they can degrade over time, but is there a specific reason why you need to change the steel coolant bypass pipe?
Has it failed?
Is there evidence that it's rusting out?
If the coolant has been properly managed and changed at appropriate intervals, the pipe should be in good shape. If that's the case, change the hoses, but save your money and continue to use the bypass pipe.
Has it failed?
Is there evidence that it's rusting out?
If the coolant has been properly managed and changed at appropriate intervals, the pipe should be in good shape. If that's the case, change the hoses, but save your money and continue to use the bypass pipe.
#3
Coolant hose
I have a 2002 regular cooper and just started leaking from the radiator. Since I'm removing the radiator, I think it would be a VERY good idea to change the water pump, thermostat and the hoses, taking in consideration that this is a 14 year-old car and has almost 130,000 miles, I know is past due already.
I don't want to disassemble the front of the car again. I found the "water pipe" that goes from the pump to somewhere (I don't know yet), but I couldn't find any aftermarket replacement. The part number is 11537629401 and is the part #1 in the image.
I did search online and I can only find BMW/MINI genuine starting at $182...expensive! My car's trading value is about $1600, so I want to keep the cost as low as possible.
Open to suggestions. Thanx
I don't want to disassemble the front of the car again. I found the "water pipe" that goes from the pump to somewhere (I don't know yet), but I couldn't find any aftermarket replacement. The part number is 11537629401 and is the part #1 in the image.
I did search online and I can only find BMW/MINI genuine starting at $182...expensive! My car's trading value is about $1600, so I want to keep the cost as low as possible.
Open to suggestions. Thanx
Check our website and our Value Line that may have the right hose for you.
http://new.minimania.com/Search_Results/hoses/All
Drive Hard. Drive Safe. Keep Grinning.
#4
#6
Note....always look at your car before ordering parts!!
Good to hear you figured it out before ordering it.....
Just a reminder....
Change your coolant....it is the most overlooked item on the gen1 cars.
The car has cast iron block...and the first warning sign is you heater suddenly seems weak as the rust chunks block coolant flow in the heater core....
Good to hear you figured it out before ordering it.....
Just a reminder....
Change your coolant....it is the most overlooked item on the gen1 cars.
The car has cast iron block...and the first warning sign is you heater suddenly seems weak as the rust chunks block coolant flow in the heater core....
#7
Trending Topics
#8
While you're in there and have things apart, you should change out all the oil-related seals and gaskets you can get to. A possible reason that your bypass pipe was dirty beyond recognition may be that your crankshaft sensor o-ring has been seeping oil for a while, and the dirt that's on the pipe (and front of the engine) might be from oil blow-off from that leaking seal.
Last edited by AoxoMoxoA; 06-09-2016 at 05:45 AM. Reason: Clarification/photo
#9
#10
How does your valve cover and/or oil pan look? Are there signs of seepage? Is the bottom of the oil pan wet? If so, there's oil working its way down from above.
A larger job that may or may not be needed is the crankshaft seal which requires you to remove the crankshaft pulley in order to access/replace. Again, if there is seepage here, it will work its way down to the oil pan.
Last edited by AoxoMoxoA; 06-10-2016 at 06:20 AM.
#11
Thread
Thread Starter
Forum
Replies
Last Post
hobhancock
Stock Problems/Issues
54
11-21-2023 06:49 AM
tomr56
Stock Problems/Issues
6
07-09-2023 08:13 AM
jbourne
R56 :: Hatch Talk (2007+)
11
10-19-2021 03:37 AM