Interior/Exterior Challenge 210 Stripes
#1
Challenge 210 Stripes
I'm looking to do the boot and bonnet stripes that are on the Challenge 210 edition but cannot seem to find them anywhere. Mini's US site doesn't have them and I haven't had much luck finding them on other sites.
Anyone have any leads on how to get them?
Pic for what I'm talking about
Anyone have any leads on how to get them?
Pic for what I'm talking about
#2
They are usually known as Viper stripes like below
https://www.mini-graphics.co.uk/mini-viper-stripes
Perhaps you can search local to see if anyone does them although I'm sure the company above can send them to you?
Not sure if Mini sell them too, you could check your local mini parts department
https://www.mini-graphics.co.uk/mini-viper-stripes
Perhaps you can search local to see if anyone does them although I'm sure the company above can send them to you?
Not sure if Mini sell them too, you could check your local mini parts department
#5
Thanks for the help so far everyone! While all of the stripes linked to are close none are wide enough when compared to the Challenge stripes.
I even checked the Mini UK accessory store and they don't have them. Kind of strange. If I could locate a part number then I would be golden.
I might just need to have a local vinyl shop cut them for me.
I even checked the Mini UK accessory store and they don't have them. Kind of strange. If I could locate a part number then I would be golden.
I might just need to have a local vinyl shop cut them for me.
Trending Topics
#9
Those stripes seem not as wide. The ones on the challenge go almost to the windshield washer nozzle, but now that I look at it closer the Challenge has the stripes with more space between them.
It's hard to tell if the actual stripes are the same width but just spaced out further from each other.
It's hard to tell if the actual stripes are the same width but just spaced out further from each other.
#15
How much should one expect to pay for double stripes with outside pin stripes on a 2013 R59 JCW roadster with aero kit? I am wanting to add black bonnet and boot stripes similar to Mdaz75 above but want to have them run all the way to the bottom both front and back. A local vinyl shop in St. Louis quoted "somewhere between $700 and $800" which seems outrageous to me. He said they would have to pull some parts off the car to tuck stripes underneath. Not sure if that is really necessary so I asked how much if he didn't "tuck" the stripes and the price dropped to around $600. Still too much in my opinion. Thoughts?