What was the car you learned to drive?
#26
I loved mine too - March of 73 - had the same front end as a Porsche. They changed the design in the summer of 73.
I'll get another one - but my next one will be a 65 hardtop. They were more round.
FWIW, the current Fiat 500 is about as close as you can currently get to a classic bug - with all the safety and amenities of today.
I'll get another one - but my next one will be a 65 hardtop. They were more round.
FWIW, the current Fiat 500 is about as close as you can currently get to a classic bug - with all the safety and amenities of today.
The following users liked this post:
Rich Rodichok (01-11-2018)
The following users liked this post:
Rich Rodichok (01-11-2018)
#28
I learned to "drive" on a small tractor. I learned to drift in a gokart on a dirt track. Somehow I didn't kill myself on the 60cc Yamaha dirt bike.
The first on road vehicle I learned to drive was a 1970 VW bus. The shift lever stuck up from the floor about 3 feet and your lower legs were the crumple zone.
The first on road vehicle I learned to drive was a 1970 VW bus. The shift lever stuck up from the floor about 3 feet and your lower legs were the crumple zone.
The following users liked this post:
Rich Rodichok (01-12-2018)
#29
Before learning to drive actual cars, there were these:
1972 Yamaha 250 Trials. The first actual motored vehicle I learned how to crash, a lot, when I was 12.
Traded the bike for something a little more stable (not really) when I was 14. 1982 Yamaha Tri-Moto 200.
Then bought a brand new Honda 200x with my newspaper money when I was 16.
1972 Yamaha 250 Trials. The first actual motored vehicle I learned how to crash, a lot, when I was 12.
Traded the bike for something a little more stable (not really) when I was 14. 1982 Yamaha Tri-Moto 200.
Then bought a brand new Honda 200x with my newspaper money when I was 16.
The following users liked this post:
vetsvette (01-12-2018)
#30
The following users liked this post:
Rich Rodichok (01-12-2018)
#31
Well if we are going pre cars. Then it was a Moped, then a dirtbike for me. Then before that a bicycle.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
The following users liked this post:
Rich Rodichok (01-12-2018)
#32
The following users liked this post:
Rich Rodichok (01-30-2018)
#33
And not even the AMX version.
Will never forget the look on the DMV Inspectors face when he came out to test me. "We're takin' this? Well... I guess - hope nobody I know actually see's me in this. Lets just get this over with pretty quick - what ya say kid?"
While not the specific car - it was identical to this one here.
Will never forget the look on the DMV Inspectors face when he came out to test me. "We're takin' this? Well... I guess - hope nobody I know actually see's me in this. Lets just get this over with pretty quick - what ya say kid?"
While not the specific car - it was identical to this one here.
The following users liked this post:
Rich Rodichok (04-16-2018)
#34
The following users liked this post:
Rich Rodichok (04-16-2018)
#35
In 1958 we, my friend and I, started working on a 1947 Crosley sedan. We removed the body, wheels, and everything else (not that there was much to these little cars.
We had help with diamond plate fenders that were made from parts from an old fire truck. The tires/wheels are off of old air tire wheel barrows. We added an extra transmission from a old jeep three speed, so it now had two transmissions (to make it go slower, if it was needed, needless to say, we really did not use it. we built nice little bucket seating, which worked when we were nine, but by two years later, we had to make the seating larger, as we both had grown so much (the picture is during transition. hence the seats were just cushions at time of photo.)
I ended up getting twelve Crosley cars in the long run and wish I had them now!
We both became quite good drivers with this and a renault that we turned into a drag car with a BMW Isetta 300 front end, a ice boat racer frame, with the Renault on the back! (I have long ago lost pics)
Here are the only two I have:
We had help with diamond plate fenders that were made from parts from an old fire truck. The tires/wheels are off of old air tire wheel barrows. We added an extra transmission from a old jeep three speed, so it now had two transmissions (to make it go slower, if it was needed, needless to say, we really did not use it. we built nice little bucket seating, which worked when we were nine, but by two years later, we had to make the seating larger, as we both had grown so much (the picture is during transition. hence the seats were just cushions at time of photo.)
I ended up getting twelve Crosley cars in the long run and wish I had them now!
We both became quite good drivers with this and a renault that we turned into a drag car with a BMW Isetta 300 front end, a ice boat racer frame, with the Renault on the back! (I have long ago lost pics)
Here are the only two I have:
Last edited by ItsmeWayne; 04-21-2018 at 08:05 AM.
The following 2 users liked this post by ItsmeWayne:
cmt52663 (03-17-2024),
Rich Rodichok (04-19-2018)
#36
The following users liked this post:
Rich Rodichok (04-20-2018)
#37
This 2-ton capacity 1970 Jeep Gladiator J-3000, which came with a Buick 350 V-8, Timken 4-speed manual transmission (1st was a "creeper" gear, making it essentially a 3-speed in daily driving) and dual-range 4-wheel drive. I'm the shirtless hunk on the right, along with two friends, plus my mom in the back. Picture taken near Schroon Lake, NY in 1972. BTW, I actually took my driving test in this beast!
The following 2 users liked this post by KeyPlayaJim:
grunte (06-11-2019),
Rich Rodichok (04-20-2018)
#38
The following users liked this post:
Rich Rodichok (04-20-2018)
#39
The following users liked this post:
Rich Rodichok (04-20-2018)
#40
Wow!
Cool thread here!
I especially like the Lancia Beta and Citroen Deese.
I first learned to drive in a rather sketchy homemade go-kart.
Later, dad taught me manual gearbox on a Dodge Omni 024.
Finally got the swing of things with a 1979 Honda Accord CVCC hatchback 5spd,
similar to this one:
Cool thread here!
I especially like the Lancia Beta and Citroen Deese.
I first learned to drive in a rather sketchy homemade go-kart.
Later, dad taught me manual gearbox on a Dodge Omni 024.
Finally got the swing of things with a 1979 Honda Accord CVCC hatchback 5spd,
similar to this one:
The following users liked this post:
Rich Rodichok (04-23-2018)
#41
This 2-ton capacity 1970 Jeep Gladiator J-3000, which came with a Buick 350 V-8, Timken 4-speed manual transmission (1st was a "creeper" gear, making it essentially a 3-speed in daily driving) and dual-range 4-wheel drive. I'm the shirtless hunk on the right, along with two friends, plus my mom in the back. Picture taken near Schroon Lake, NY in 1972. BTW, I actually took my driving test in this beast!
#42
Cool! Before this one, my parents had a white '64 Gladiator with the straight six ("Hurricane" Six, I think...?) and "three on the tree." As far as I know, Kaiser Jeep produced their own 4- and 6-cylinder engines, but the V-8s were Chevy (327) and Buick (350).
The following users liked this post:
Rich Rodichok (04-23-2018)
#43
Quote: I had two of these. The first a 1965 with a 327 Gladiator V8 and the second a 1966 with the overhead cam, straight six. They both were work horses, with the 1965 being the ultimate 4speed 4X4 work on the ranch truck! Wish I still had it! end quote.
No, they made the 327 Gladiator V8 engine too!
The AMC 327 is similar to the 287, but displaces 327 cu in (5.4 L) due to the bore increase to 4.0 inches (102 mm). Unlike the 250, the 327 was produced with hydraulic valve lifters. Contrary to some myths, the AMC V8 was not built by Chevrolet, whose own 327 V8 later became better known. The AMC 327 was introduced five years before the Chevrolet 327 engine was manufactured.[5]
During 1965 the 327 cu in (5.4 L) AMC V8 engine became available. It produced 250 hp (186 kW; 253 PS) and 340 pound force-feet (461 N⋅m) of torque at 2600 rpm.
This was a good engine!
No, they made the 327 Gladiator V8 engine too!
The AMC 327 is similar to the 287, but displaces 327 cu in (5.4 L) due to the bore increase to 4.0 inches (102 mm). Unlike the 250, the 327 was produced with hydraulic valve lifters. Contrary to some myths, the AMC V8 was not built by Chevrolet, whose own 327 V8 later became better known. The AMC 327 was introduced five years before the Chevrolet 327 engine was manufactured.[5]
During 1965 the 327 cu in (5.4 L) AMC V8 engine became available. It produced 250 hp (186 kW; 253 PS) and 340 pound force-feet (461 N⋅m) of torque at 2600 rpm.
This was a good engine!
The following users liked this post:
Rich Rodichok (04-23-2018)
#44
The following users liked this post:
Rich Rodichok (04-23-2018)
#45
The following users liked this post:
Rich Rodichok (04-23-2018)
#46
The following users liked this post:
Rich Rodichok (04-23-2018)
#47
The following users liked this post:
Rich Rodichok (01-28-2019)
#48
The following users liked this post:
Rich Rodichok (01-28-2019)
#49
This 2-ton capacity 1970 Jeep Gladiator J-3000, which came with a Buick 350 V-8, Timken 4-speed manual transmission (1st was a "creeper" gear, making it essentially a 3-speed in daily driving) and dual-range 4-wheel drive. I'm the shirtless hunk on the right, along with two friends, plus my mom in the back. Picture taken near Schroon Lake, NY in 1972. BTW, I actually took my driving test in this beast!
#50
1976 VW Rabbit with manual 4-speed.
I drove it the last year or two of high school
and commuting to college. Then my
folks helped me get a 1982 VW Rabbit S
5-speed without AC (the year before the
GTI came out in the states) and I drove
and modified that for the next 21 years
until I sold it and got my first MINI, a
2003 R50 Cooper. When that got totaled
in a relatively minor accident last May,
I got my current MINI, a low mileage
2009 JCW Clubman.
I drove it the last year or two of high school
and commuting to college. Then my
folks helped me get a 1982 VW Rabbit S
5-speed without AC (the year before the
GTI came out in the states) and I drove
and modified that for the next 21 years
until I sold it and got my first MINI, a
2003 R50 Cooper. When that got totaled
in a relatively minor accident last May,
I got my current MINI, a low mileage
2009 JCW Clubman.
The following users liked this post:
Rich Rodichok (01-28-2019)