Roll call - 8"+ wide wheels
#976
Join Date: Sep 2017
Location: Newport, North Carolina
Posts: 15
Received 0 Likes
on
0 Posts
#977
#978
Join Date: Sep 2017
Location: Newport, North Carolina
Posts: 15
Received 0 Likes
on
0 Posts
#979
From your other thread, those are Corvette wheels. I believe they are 16x8.5 with a +56 offset. You will need spacer adapters to fit them to the Mini. I think the bolt pattern is 5x4.5”. They are a popular with the VW crowd.
The following users liked this post:
Bayce3 (12-04-2017)
#980
Join Date: Sep 2017
Location: Newport, North Carolina
Posts: 15
Received 0 Likes
on
0 Posts
#982
Join Date: Sep 2017
Location: Newport, North Carolina
Posts: 15
Received 0 Likes
on
0 Posts
So you've had no issues with your spacers at all? I've been reading so much negative stuff about them! Got me kinda gun shy even though I'd love to run the C4's o my mini....oh well...... We'll see I guess!
#984
#985
Join Date: Sep 2017
Location: Newport, North Carolina
Posts: 15
Received 0 Likes
on
0 Posts
#986
Sorry, I wasn't asking you... But, from what I have researched, you should be able to get away with up to a 20mm spacer at stock ride height with an OEM alignment on OEM rims. With aftermarket rims, or C4 sawblades, you'll have to do some deeper research or experimenting.
#987
6th Gear
iTrader: (8)
If you are putting them on you NEED coilovers. You wont get it stanced right without them. Look into something like the BC coilovers. Having the strut body that screws down into the mount is a slick way to get a good level while not killing ride too much.
#988
Those are Salad Shooters....not Sawblades. either way...
If you are putting them on you NEED coilovers. You wont get it stanced right without them. Look into something like the BC coilovers. Having the strut body that screws down into the mount is a slick way to get a good level while not killing ride too much.
If you are putting them on you NEED coilovers. You wont get it stanced right without them. Look into something like the BC coilovers. Having the strut body that screws down into the mount is a slick way to get a good level while not killing ride too much.
The following users liked this post:
iwashmycar (12-19-2017)
#989
#991
#992
The following 4 users liked this post by Dallas Mini23:
#994
#995
The following users liked this post:
MADNESSray (03-28-2018)
#996
#1000
The following users liked this post:
Minibeagle (05-03-2018)