Electrical A question for anyone purchasing the Spyder headlights
#1
A question for anyone purchasing the Spyder headlights
So I have decided on the following headlights:
https://www.ecstuning.com/b-spyder-p...-yd-mco11-drl/
I was wondering if anyone had decided to put LEDs in these headlights, and what they went with for them as I'd like them to go in well and see how they work. I ask because all of the LED kits I see have these large heatsinks (some with fans) behind them so I was slightly worried about heat or fitment in these cases.
Worst case if the LEDs don't work out I'll deal with halogen until I can find suitable projectors.
Does anyone have any information or experience with retrofitting these?
https://www.ecstuning.com/b-spyder-p...-yd-mco11-drl/
I was wondering if anyone had decided to put LEDs in these headlights, and what they went with for them as I'd like them to go in well and see how they work. I ask because all of the LED kits I see have these large heatsinks (some with fans) behind them so I was slightly worried about heat or fitment in these cases.
Worst case if the LEDs don't work out I'll deal with halogen until I can find suitable projectors.
Does anyone have any information or experience with retrofitting these?
#3
I went through that post which is where I first found out about it. It doesn't hit any of the questions I asked. In fact, I searched and couldn't find anyone talking about what LED headlight bulbs they went with or any challenges they had in doing it.
I'm wondering if anyone has already done it and could speak to their experience.
I'm wondering if anyone has already done it and could speak to their experience.
#4
These should be small enough to fit inside the housing:
http://www.vleds.com/shop-products/led-headlights.html
http://www.vleds.com/shop-products/led-headlights.html
The following users liked this post:
SeveNx7 (03-28-2018)
#5
These should be small enough to fit inside the housing:
http://www.vleds.com/shop-products/led-headlights.html
http://www.vleds.com/shop-products/led-headlights.html
#7
PIAA H9 Leds have been added but they are not Canbus and will have to be coded out as you will get a bulb out error. Check out that thread again.
https://www.northamericanmotoring.co...r60-r62-4.html
https://www.northamericanmotoring.co...r60-r62-4.html
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Trending Topics
#8
PIAA H9 Leds have been added but they are not Canbus and will have to be coded out as you will get a bulb out error. Check out that thread again.
https://www.northamericanmotoring.co...r60-r62-4.html
https://www.northamericanmotoring.co...r60-r62-4.html
Hmm, Interesting, would I code them as HID (For the lower power drawn and the non pulsing) or just code out the bulb check?
Thread
Thread Starter
Forum
Replies
Last Post
Interior/Exterior Spyder Projector Headlights with LEDs for your Mini
carid
Interior/Exterior
34
03-18-2016 07:39 AM