Suspension F56 JCW - Lowering options
#1
F56 JCW - Lowering options
Hello all,
I've just bought an F56 JCW as a daily driver, and the first mod I want to do is to reduce the enormous amount of wheel gap the car has!
Car is 100% road car only - I've got my old R53 for track use
I've seen a few images of cars dropped on H&R springs, which seems like the ideal ride height for me - but I also read that these springs are too low for the stock dampers and it runs on the bump stops all the time?
Is that correct?
I notice that the Eibach ones only lower by about 15mm, whereas H&R are 30-35mm?
Any users of H&R springs able to comment?
Thank you
I've just bought an F56 JCW as a daily driver, and the first mod I want to do is to reduce the enormous amount of wheel gap the car has!
Car is 100% road car only - I've got my old R53 for track use
I've seen a few images of cars dropped on H&R springs, which seems like the ideal ride height for me - but I also read that these springs are too low for the stock dampers and it runs on the bump stops all the time?
Is that correct?
I notice that the Eibach ones only lower by about 15mm, whereas H&R are 30-35mm?
Any users of H&R springs able to comment?
Thank you
#2
#3
Hello all,
I've just bought an F56 JCW as a daily driver, and the first mod I want to do is to reduce the enormous amount of wheel gap the car has!
Car is 100% road car only - I've got my old R53 for track use
I've seen a few images of cars dropped on H&R springs, which seems like the ideal ride height for me - but I also read that these springs are too low for the stock dampers and it runs on the bump stops all the time?
Is that correct?
I notice that the Eibach ones only lower by about 15mm, whereas H&R are 30-35mm?
Any users of H&R springs able to comment?
Thank you
I've just bought an F56 JCW as a daily driver, and the first mod I want to do is to reduce the enormous amount of wheel gap the car has!
Car is 100% road car only - I've got my old R53 for track use
I've seen a few images of cars dropped on H&R springs, which seems like the ideal ride height for me - but I also read that these springs are too low for the stock dampers and it runs on the bump stops all the time?
Is that correct?
I notice that the Eibach ones only lower by about 15mm, whereas H&R are 30-35mm?
Any users of H&R springs able to comment?
Thank you
H&R advertise 28mm,
Eibach 30mm
The "bumpstops" are technically... well, heres an article from H&R
http://www.hrsprings.com/technical/m...-jounce-bumper
The following users liked this post:
BbyDenns (06-15-2018)
#7
Trending Topics
#8
Vendor
iTrader: (10)
I would check out the KW V2 we've done these a few times and they seem to ride a little better than the JCWs, but like the adjustable valving and really bring the sports car feel back to the new F MINIs.
https://www.waymotorworks.com/kw-var...overs-f56.html
For just lowering springs only I've been pretty happy with the Craven springs as they still ride well and cost effective. Never been the H&R fan as they just loose too much travel
https://www.waymotorworks.com/craven...rings-f56.html
https://www.waymotorworks.com/kw-var...overs-f56.html
For just lowering springs only I've been pretty happy with the Craven springs as they still ride well and cost effective. Never been the H&R fan as they just loose too much travel
https://www.waymotorworks.com/craven...rings-f56.html
The following users liked this post:
xntrickly (07-01-2018)
#9
For just lowering springs only I've been pretty happy with the Craven springs as they still ride well and cost effective. Never been the H&R fan as they just loose too much travel
https://www.waymotorworks.com/craven...rings-f56.html
https://www.waymotorworks.com/craven...rings-f56.html
#10
I'm installing a set of BC Racing coil overs w/camber plates Thursday. If I'm happy with them I'll have a set of OEM Sport Suspension shocks and struts with NM springs for sale. Front struts will already be assembled.
I've been happy with the NM springs, but my plan from the beginning was to replace them with coil overs when I could afford it.
I've been happy with the NM springs, but my plan from the beginning was to replace them with coil overs when I could afford it.
#12
#14
Obviously any suspension warranty claims would be in question. As long as the springs or bars didn’t cause a failure I’m covered.
You need to take account your dealers service dept, mine’s very open minded.
They were showing me a brand new JCW they were modding. NM exhaust,, wheels, springs etc.
Any thing else would be no issues.
You need to take account your dealers service dept, mine’s very open minded.
They were showing me a brand new JCW they were modding. NM exhaust,, wheels, springs etc.
Any thing else would be no issues.
The following users liked this post:
xntrickly (07-01-2018)
#15
Obviously any suspension warranty claims would be in question. As long as the springs or bars didn’t cause a failure I’m covered.
You need to take account your dealers service dept, mine’s very open minded.
They were showing me a brand new JCW they were modding. NM exhaust,, wheels, springs etc.
Any thing else would be no issues.
You need to take account your dealers service dept, mine’s very open minded.
They were showing me a brand new JCW they were modding. NM exhaust,, wheels, springs etc.
Any thing else would be no issues.
Cheers.
#16
Looking into Cravenspeed or NM springs to lower. Couple of questions for input. When on road trips, I carry a full spare, luggage, wife. Some states (like Missouri and Oklahoma) have some of the worst roads...we also load up at Total Wine & More, bird seed (about 80 lbs.) plus groceries once a week or so. Our nearby city does not have speed bumps, the signs actually say "speed humps" and the are as wide as a MINI is long. Just have concerns about the shock/suspension travel, bottoming out. Any experiences? Thanks.
#17
Vendor
iTrader: (10)
Drive it for a few months. We always find them sag out of spec. That has been my experience with all the H&R MINI springs. So I don't expect the F56 ones to be any different. Some people actually like it being lower so I just like to inform them that is usually the case.
#18
Drive it for a few months. We always find them sag out of spec. That has been my experience with all the H&R MINI springs. So I don't expect the F56 ones to be any different. Some people actually like it being lower so I just like to inform them that is usually the case.
Thanks in advance.
#19
Drive it for a few months. We always find them sag out of spec. That has been my experience with all the H&R MINI springs. So I don't expect the F56 ones to be any different. Some people actually like it being lower so I just like to inform them that is usually the case.
__________________
With the Craven any "bumpstops" (or new tech term), camber (rear tire wear), or boots considerations?
__________________
With the Craven any "bumpstops" (or new tech term), camber (rear tire wear), or boots considerations?
#20
Drive it for a few months. We always find them sag out of spec. That has been my experience with all the H&R MINI springs. So I don't expect the F56 ones to be any different. Some people actually like it being lower so I just like to inform them that is usually the case.
__________________
With the Craven any "bumpstops" (or new tech term), camber (rear tire wear), or boots considerations?
__________________
With the Craven any "bumpstops" (or new tech term), camber (rear tire wear), or boots considerations?
#21
Drive it for a few months. We always find them sag out of spec. That has been my experience with all the H&R MINI springs. So I don't expect the F56 ones to be any different. Some people actually like it being lower so I just like to inform them that is usually the case.
9 months. no sagging!!
#22
#23
this is the look I’m going for. I have the same wheels and tires. How do you like the Bilsteins for daily driving? I drive 25,000 miles a year or so. I was told they rattle at highway speeds but that information is based off the R56. Your thoughts?
The following users liked this post:
Bryce Jay (05-05-2021)
Thread
Thread Starter
Forum
Replies
Last Post
HemiCooper0509
F55/F56 :: Hatch Talk (2014+)
2
01-24-2016 05:52 PM
UUNetBill
R56 :: Hatch Talk (2007+)
28
06-24-2013 03:17 PM
youthanasia
1st Gen Countryman (R60) Talk (2010-2015)
16
01-10-2013 08:43 PM