Power steering wire
#1
Power steering wire
hi all im newbie here...
i have a 2003 r50 automatic (non S) were trying to fix my brake master cylinder and he accidentally broke the fuse box right next to the battery compartment..so we took battery compartment so we have more space to unplug ecu. adn fuse box and bought a used fuse box at miniworld..installed it and i just noticed 1 wire is not connected to the fuse box so i trace that wire and its from the power steering. can you guys help me were this thing is connected? red and green or red and red i know the big red wire goes to the fuse box but this one i dont know were my friend got this i tried asking him he forgot it too...please help me i have work friday...
i have a 2003 r50 automatic (non S) were trying to fix my brake master cylinder and he accidentally broke the fuse box right next to the battery compartment..so we took battery compartment so we have more space to unplug ecu. adn fuse box and bought a used fuse box at miniworld..installed it and i just noticed 1 wire is not connected to the fuse box so i trace that wire and its from the power steering. can you guys help me were this thing is connected? red and green or red and red i know the big red wire goes to the fuse box but this one i dont know were my friend got this i tried asking him he forgot it too...please help me i have work friday...
#2
Thanks guys got the answer i search it on google...
The PS pump wiring harness does sometimes need replacement:
Quote:
If the PS cable harness or connector is burnt or damaged it can be easily removed from a scrap MINI as it is only about 2 feet long with just 2 wires in it, only attached with cable ties (easily cut to get the loom out) and the other end, 1 wire is plugged into the bottom of the engine bay fuse box (the box is secured by 2 x 8mm headed bolts, remove them and the box lifts enough to unplug the connector) the other wire is bolted to a earth point on the chassis rail under the fuse box... (they are really thick cables, and carry alot of current so not worth trying to splice into your existing loom.) even a novice would be able to remove and refit this cable in around 20 minutes tops.
thanks...back to work friday payday
The PS pump wiring harness does sometimes need replacement:
Quote:
If the PS cable harness or connector is burnt or damaged it can be easily removed from a scrap MINI as it is only about 2 feet long with just 2 wires in it, only attached with cable ties (easily cut to get the loom out) and the other end, 1 wire is plugged into the bottom of the engine bay fuse box (the box is secured by 2 x 8mm headed bolts, remove them and the box lifts enough to unplug the connector) the other wire is bolted to a earth point on the chassis rail under the fuse box... (they are really thick cables, and carry alot of current so not worth trying to splice into your existing loom.) even a novice would be able to remove and refit this cable in around 20 minutes tops.
thanks...back to work friday payday
Thread
Thread Starter
Forum
Replies
Last Post
Manny_cooper
Stock Problems/Issues
5
09-10-2015 11:09 AM
Mini Mania
Drivetrain Products
0
08-25-2015 09:33 AM
minipopkart
R50/R53 :: Hatch Talk (2002-2006)
2
08-13-2015 05:22 AM