Headlight Alignment Question
#1
Headlight Alignment Question
I can't seem to get my headlight alignment correct on my '02 MCS. If I adjust my low beams correctly, my high beams are in the trees. If I get the high beams right my lows are practically shining on my bumper. I have looked though my Bentley manual and they just call out the left right / up down adjustment of the housing but I can't find anything on adjusting the relationship between the high & low beams. Is this adjustable? Any idea on how to fix?
#2
are you doing this because you changed the bulbs? Reason I ask is I had a similar problem when I changed a set of bulbs and they were not correctly seated in the sockets.... If not properly aligned and flush in the sockets they don't line up to the reflectors correctly. I had one low beam going off to never never land until I found the problem and reseated it. Mine was an 02 as well . . . the clip snapped down fine, but the bulb was not flush in the holder.... as I recall there is an alignment tab that you need to ensure drops into a slot . . . 02s were a lil different from later years in this regard. All was fine b4 I changed the bulbs so I knew I shouldn't need to actually mess with the light unit's settings....
Thread
Thread Starter
Forum
Replies
Last Post
Interior/Exterior DEPO/Helix Projector Headlights Installed
Alkaidovich
Interior/Exterior
68
01-30-2021 01:35 AM
AZN Optics
Interior/Exterior Products
0
08-21-2015 02:02 PM