Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Clubman (R55), Cooper and Cooper S(R56), and Cabrio (R57).

Water pump leaks - how many miles?

Thread Tools
 
Search this Thread
 
  #51  
Old 04-19-2013, 09:38 AM
kyoo's Avatar
kyoo
kyoo is offline
6th Gear
iTrader: (2)
Join Date: Oct 2012
Posts: 2,631
Likes: 0
Received 71 Likes on 53 Posts
Originally Posted by myR56S
I am sorry, you are correct. It is MIN & MAX. Sorry I was thinking of my other car.

If you have only filled it once then you might just be starting to see the begining stages of one of the two parts begining to fail.

My thermostat housing started leak a little around where the temp sensor goes. And then the major leaking was when the two halves of the housing (which are glued together) started leaking where the return pipe attaches the housing.

The water pump leaks at the bottom of the pump from what looks like an electrical plug of sorts. Easiest way to see that is to jack up the car and crawl under there and use a flash light to see if there is any dried up coolant on the pump or block.

When the water pump begins to leak it leaks so slow that the coolant dries up from the heat before it touches the ground. The telltale is the greenish/blue colour on the block.
i'll keep an eye out. thanks for all your input, very helpful.
 
  #52  
Old 04-19-2013, 03:27 PM
kyoo's Avatar
kyoo
kyoo is offline
6th Gear
iTrader: (2)
Join Date: Oct 2012
Posts: 2,631
Likes: 0
Received 71 Likes on 53 Posts
Originally Posted by myR56S
My W/P and thermostat housing were both leaking. At first the thermostat housing was leaking the worst. It leaks onto the transmission and pools right on top. Easy to see when looking past the intake tube. Also it leaks down the transmission and drips onto the ground just to the driver side of the middle of the car.

The water pump is located on the passenger side and it drips down the motor and we onto the passenger side of the vehicle.

Where the coolant leaks is a certain telltale of what part is failing.
looks like passenger side for me:

Name:  IMG_2082_zpsa02f6ab6.jpg
Views: 1213
Size:  188.1 KB

Some drops on the lip of the passenger side of the car too, as well as the plastic undertray type piece on the passenger side.
 
  #53  
Old 04-19-2013, 03:33 PM
myR56S's Avatar
myR56S
myR56S is offline
3rd Gear
Join Date: Feb 2012
Posts: 256
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by kyoo

looks like passenger side for me:



Some drops on the lip of the passenger side of the car too, as well as the plastic undertray type piece on the passenger side.
Is that at the front of the engine?
 
  #54  
Old 04-19-2013, 03:34 PM
kyoo's Avatar
kyoo
kyoo is offline
6th Gear
iTrader: (2)
Join Date: Oct 2012
Posts: 2,631
Likes: 0
Received 71 Likes on 53 Posts
Originally Posted by myR56S
Is that at the front of the engine?
yeah very front. i believe the silver thing on the right is the exhaust heat shield manifold. gonna see if i can get better pics.
 
  #55  
Old 04-19-2013, 03:37 PM
myR56S's Avatar
myR56S
myR56S is offline
3rd Gear
Join Date: Feb 2012
Posts: 256
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by kyoo

yeah very front. i believe the silver thing on the right is the exhaust heat shield manifold. gonna see if i can get better pics.
Water pump is on the back of the motor. I am thinking radiator hose.

There is nothing else up that way. Can you get under the car?
 
  #56  
Old 04-19-2013, 03:46 PM
kyoo's Avatar
kyoo
kyoo is offline
6th Gear
iTrader: (2)
Join Date: Oct 2012
Posts: 2,631
Likes: 0
Received 71 Likes on 53 Posts
Originally Posted by myR56S
Water pump is on the back of the motor. I am thinking radiator hose.

There is nothing else up that way. Can you get under the car?
gotcha. not immediately, but I'll take pics soon.. Thanks
 
  #57  
Old 04-19-2013, 04:21 PM
kyoo's Avatar
kyoo
kyoo is offline
6th Gear
iTrader: (2)
Join Date: Oct 2012
Posts: 2,631
Likes: 0
Received 71 Likes on 53 Posts
Thanks for the help - since this is a separate issue, I moved the topic recap to a thread here: https://www.northamericanmotoring.co...ml#post3723237
 

Last edited by kyoo; 04-19-2013 at 05:05 PM.
  #58  
Old 04-22-2013, 10:08 AM
MiniTea's Avatar
MiniTea
MiniTea is offline
Neutral
Join Date: Aug 2012
Location: Montreal Canada
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
I've change it last weekend 102000km
 
  #59  
Old 04-22-2013, 12:04 PM
alexs3d2's Avatar
alexs3d2
alexs3d2 is offline
4th Gear
Join Date: Jan 2011
Posts: 393
Received 6 Likes on 4 Posts
I changed mine last week... Car has 55k km/35k mls. But I didn't go with the OEM, I bought myself a GRAF PA994. The housing and impeller are aluminium and composite respectively, just like the newer OEM.

The plastic original ones have a kind of plug on them which is a valve: this is where mine was leaking from. The aluminium ones (OEM or not) do not have that.
 
  #60  
Old 04-22-2013, 03:26 PM
08ChiliRedS's Avatar
08ChiliRedS
08ChiliRedS is offline
1st Gear
Join Date: Mar 2013
Location: Woodstock,GA
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Just replaced mine last week with a hepa aluminum housing. It had 101,000 miles on my 08 MCS
 
  #61  
Old 04-22-2013, 04:29 PM
kyoo's Avatar
kyoo
kyoo is offline
6th Gear
iTrader: (2)
Join Date: Oct 2012
Posts: 2,631
Likes: 0
Received 71 Likes on 53 Posts
is there an oem version that's aluminum as well?
 
  #62  
Old 04-22-2013, 06:26 PM
Albiecrazy's Avatar
Albiecrazy
Albiecrazy is offline
6th Gear
Thread Starter
Join Date: Mar 2009
Location: Eastern Long Island, NY
Posts: 1,980
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Albiecrazy

Here's the new aluminum pump from MINI.
 
  #63  
Old 04-29-2013, 07:18 AM
Everyday I'm Motorin's Avatar
Everyday I'm Motorin
Everyday I'm Motorin is offline
2nd Gear
Join Date: Mar 2012
Location: Alabama
Posts: 51
Likes: 0
Received 4 Likes on 4 Posts
60k miles and mine is toast.
 
  #64  
Old 05-07-2013, 09:42 PM
MatthewMateo's Avatar
MatthewMateo
MatthewMateo is offline
2nd Gear
iTrader: (1)
Join Date: Dec 2010
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
I just changed mine last weekend. It was a *****, but you can do it with a basic set of metric sockets and wrenches. Those looking to do it by themselves, buy the part from Pelican. I paid $60 for the new OEM aluminum part.
 
  #65  
Old 05-07-2013, 11:08 PM
dejavu3's Avatar
dejavu3
dejavu3 is offline
1st Gear
Join Date: Feb 2013
Location: Melbourne, Australia
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Mine was changed 2 weeks ago @ 33'000KM (~20'000 miles). I had it replaced with a Graf one and the mechanic did not mention any fitment issues. I specifically asked him about the length of the pump shaft and he said it was OK.

Total cost of part + labor was ~AUD$400.
 
  #66  
Old 08-27-2013, 08:52 AM
fyzawyza's Avatar
fyzawyza
fyzawyza is offline
1st Gear
Join Date: Mar 2010
Location: Oakland, CA
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Leaking as well

I'm at East Bay Mini for some maintenance work, and my service adviser just showed me a picture of the undercarriage; it shows staining where the pump is leaking and drying up. I've got some 61,000 miles on it. The part is about $200 and with labor it'll run me over $700.

eh yeah. . . that's a DIY. More accurately that'll be ask my engineer-car-enthusiast-self-taught-Bimmer-mechanic brother to do it.
 
  #67  
Old 08-27-2013, 12:31 PM
ECSTuning's Avatar
ECSTuning
ECSTuning is online now
Platinum Sponsor
Join Date: Jan 2013
Location: Wadsworth, Ohio
Posts: 35,217
Received 2,083 Likes on 1,859 Posts
This might help you with the install. Show you the location and what it looks like removed. Its a little tight in there on the re-install, but can be done. Good luckl. The Genuine MINI one is now has the metal housing.

https://www.northamericanmotoring.co...ater-pump.html


http://www.ecstuning.com/Search/SiteSearch/11518604888/





&

Hepu Brand version



Thanks
 
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
  #68  
Old 09-02-2013, 08:14 AM
orfordbrits's Avatar
orfordbrits
orfordbrits is offline
1st Gear
Join Date: Nov 2009
Location: Northern New Hampshire
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
I have an 09 S with 72K on it, and was told during regular service that the water pump was "seeping". Plan to get it done soon, but issue is that I got a P0128 error code on the way home from service. Any ideas of if this is related to the pump issue- or testing for the pump? Seems to have plenty of coolant and is running well. Car is out of warranty so I was thinking of having the mechanic I took my Saabs to do the water pump as the dealer is 2 hours away. Mini quoted $660 for the water pump. Any thoughts on what threw the code or the cost of the job?
 
  #69  
Old 09-17-2013, 08:12 PM
brazenone's Avatar
brazenone
brazenone is offline
1st Gear
Join Date: Mar 2011
Location: San Diego
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
My 07 R56 had the water pump replaced this April at 48k miles. It was handled under extended warranty so I lost track of the cost. I used the opportunity to replace the thermostat and the serpentine belt.
 
  #70  
Old 03-07-2014, 07:59 AM
Copywrites's Avatar
Copywrites
Copywrites is offline
3rd Gear
Join Date: Feb 2008
Posts: 212
Likes: 0
Received 0 Likes on 0 Posts
58K miles and both leaking water pump and thermostat. $1000 for the two items.
 
  #71  
Old 03-07-2014, 12:01 PM
RockAZ's Avatar
RockAZ
RockAZ is offline
4th Gear
Join Date: Jun 2013
Location: Tucson
Posts: 546
Received 4 Likes on 4 Posts
52k miles on a 2008 Justa in Jan 2014, just the waterpump and timing belt replaced - everything else still looked new.
 
  #72  
Old 03-07-2014, 07:42 PM
RadioFlyer's Avatar
RadioFlyer
RadioFlyer is offline
4th Gear
Join Date: Apr 2009
Location: Sacramento, CA
Posts: 359
Received 0 Likes on 0 Posts
Just did my Justa last week. 2009 with 33,300 miles.
 
  #73  
Old 03-07-2014, 08:39 PM
Systemlord's Avatar
Systemlord
Systemlord is offline
6th Gear
Join Date: Mar 2013
Location: Mission Viejo, CA
Posts: 3,428
Likes: 0
Received 34 Likes on 34 Posts
There's a lot of parts on our Mini's dying prematurely, these plastic parts simply will not do! Replaced my thermostat housing at 49k, even though I have a 6-Year extended warranty I plan on eating the bullet and replacing my water pump before it dies!
 
  #74  
Old 03-07-2014, 08:39 PM
Albiecrazy's Avatar
Albiecrazy
Albiecrazy is offline
6th Gear
Thread Starter
Join Date: Mar 2009
Location: Eastern Long Island, NY
Posts: 1,980
Likes: 0
Received 1 Like on 1 Post
RadioFlyer - just out of warranty, right? MINI should really be extending the warranty out on this like they did with the power steering pump on the Gen 1's. Of course, most Gen 1's were beyond the 100,000 at the point MINI pulled the trigger...

Man, I love this car, but I started this thread because MINI should be doing the right thing on known and rampant problems and deal with it early. I know, it's not the business model, but I haven't been a fan of the "business model" since '08 when, oh by the way, I BOUGHT MY MINI. All of us have bought into the MINI concept - make it SOLID in every way and we'll be back!
 
  #75  
Old 03-07-2014, 08:57 PM
RadioFlyer's Avatar
RadioFlyer
RadioFlyer is offline
4th Gear
Join Date: Apr 2009
Location: Sacramento, CA
Posts: 359
Received 0 Likes on 0 Posts
About 8 months out. I called in the Goodwill favor and only had to cough up $101 for it but still ticks me off


Im pretty much done with Oxley at this point. Just not sure what's next.
 


Quick Reply: Water pump leaks - how many miles?



All times are GMT -7. The time now is 08:38 AM.