Vacuum line problems
#1
Vacuum line problems
Hello, I just signed up, and found alot of info on nam except this. I own a r56 07 mini cooper s 6 speed, i found the vacuum leak how ever i can seem to get to it, its right under the engine bay on top of the vavle cover on the left corner but I can't seem to remove that cover that has the Mini logo on it, thanks guys
#4
+1 Yes the valve cover is one piece.
Here is a picture for reference when you post up your pic.
N14 Valve cover , comes without MINI emblem.
http://www.ecstuning.com/Search/11127646555/ES2601877/
MINI emblem for valve cover:
http://www.ecstuning.com/Search/11127594876/ES514833/
Thanks
Here is a picture for reference when you post up your pic.
N14 Valve cover , comes without MINI emblem.
http://www.ecstuning.com/Search/11127646555/ES2601877/
MINI emblem for valve cover:
http://www.ecstuning.com/Search/11127594876/ES514833/
Thanks
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#6
#7
Trending Topics
#8
This is the line that connects from the rear corner of the valve cover and then goes down below the manifold.
You have the press the sides of the ring to un-clip it.
http://www.ecstuning.com/Search/11157605186/
Thanks and I hope that helps.
You have the press the sides of the ring to un-clip it.
http://www.ecstuning.com/Search/11157605186/
Thanks and I hope that helps.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#9
#10
This is the line that connects from the rear corner of the valve cover and then goes down below the manifold.
You have the press the sides of the ring to un-clip it.
http://www.ecstuning.com/Search/11157605186/
Thanks and I hope that helps.
You have the press the sides of the ring to un-clip it.
http://www.ecstuning.com/Search/11157605186/
Thanks and I hope that helps.
#11
This is the line that connects from the rear corner of the valve cover and then goes down below the manifold.
You have the press the sides of the ring to un-clip it.
http://www.ecstuning.com/Search/11157605186/
Thanks and I hope that helps.
You have the press the sides of the ring to un-clip it.
http://www.ecstuning.com/Search/11157605186/
Thanks and I hope that helps.
#12
#13
This is the line that connects from the rear corner of the valve cover and then goes down below the manifold.
You have the press the sides of the ring to un-clip it.
http://www.ecstuning.com/Search/11157605186/
Thanks and I hope that helps.
You have the press the sides of the ring to un-clip it.
http://www.ecstuning.com/Search/11157605186/
Thanks and I hope that helps.
#14
Great, you found the leak. Just clips in and there are little o-ring on the ends which you can see in the pics.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#15
"I'm going to give this a shot, and yes that's the hose im talking about, how do I clip it back?"
Press the sides of the outer ring and then push towards the valve cover hole and insert it, it should clip right on. The bottom is the same way. Follow the dotted lines on the diagram above.
Press the sides of the outer ring and then push towards the valve cover hole and insert it, it should clip right on. The bottom is the same way. Follow the dotted lines on the diagram above.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#18
https://www.northamericanmotoring.co...se-delete.html
This is the hose delete mod, but shows you where that hose goes above
This is the hose delete mod, but shows you where that hose goes above
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
Kimolaoha
R56 :: Hatch Talk (2007+)
70
07-05-2023 01:04 PM
PelicanParts.com
Vendor Announcements
0
08-14-2015 11:07 AM