Classic LCA bushing replacement
#1
Classic LCA bushing replacement
I guess when you are over 90k these things are expected. Has anyone had a shop replace their lower control arm bushing/joint? How much did it cost you?
I cost some wiggle going in in my passenger side front wheel and the brake moves along with it so I ca only imagine its a bushing or some loose suspensions.
I cost some wiggle going in in my passenger side front wheel and the brake moves along with it so I ca only imagine its a bushing or some loose suspensions.
#2
#3
#4
So they can reuse the joint and just put a new pushing in? It seemed like the entire lie Ed needs to be replaced.
#5
Book time, according to KSD, is 2.8 (warranty) usually multiplied by 1.5 or 1.6 flat rate hours. multiply that by the shop rate- $100-$140/hr. You can buy the whole housing with a new crappy bushing, you can buy a new crappy bushing without the housing, or you can buy polyurethane bushings that totally kick ***.
#6
Book time, according to KSD, is 2.8 (warranty) usually multiplied by 1.5 or 1.6 flat rate hours. multiply that by the shop rate- $100-$140/hr. You can buy the whole housing with a new crappy bushing, you can buy a new crappy bushing without the housing, or you can buy polyurethane bushings that totally kick ***.
Thread
Thread Starter
Forum
Replies
Last Post
silence2-38554
R50/R53 :: Hatch Talk (2002-2006)
3
11-12-2015 09:39 AM
minipopkart
R50/R53 :: Hatch Talk (2002-2006)
2
08-13-2015 05:22 AM
PelicanParts.com
Vendor Announcements
0
08-04-2015 02:45 PM