Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Clubman (R55), Cooper and Cooper S(R56), and Cabrio (R57).

Yellow Brake Light with Yellow ! with circle on Startup

Thread Tools
 
Search this Thread
 
  #1  
Old 09-15-2016 | 01:52 PM
Bgould's Avatar
Bgould
Thread Starter
|
Neutral
Joined: Sep 2016
Posts: 8
Likes: 0
Yellow Brake Light with Yellow ! with circle on Startup

Hi Everyone. I recently purchased a 2008 Mini Cooper S 6 speed with 89000 Miles. When I start the car there is a yellow circle with and exclamation point in the middle of it. This only stays on for a short time. When I release my emergency brake, the brake light changes from red to yellow. Can any one give me ideas as to what the issue may be? Let me now if you need any more details. Thanks in advance.
 
  #2  
Old 09-15-2016 | 02:00 PM
MiniToBe's Avatar
MiniToBe
6th Gear
iTrader: (2)
Joined: Jan 2015
Posts: 4,336
Likes: 432
From: Philadelphia PA
check your brake fluids, check the pads, check fuses in the front and behind the kick panel of the passenger side. also pix are helpful from before and after.
 
  #3  
Old 09-15-2016 | 02:03 PM
Bgould's Avatar
Bgould
Thread Starter
|
Neutral
Joined: Sep 2016
Posts: 8
Likes: 0
Thanks for the tips. I have checked the fluid level and that was fine. I will check the rest and let you know what I find.
 
  #4  
Old 09-15-2016 | 02:12 PM
MiniToBe's Avatar
MiniToBe
6th Gear
iTrader: (2)
Joined: Jan 2015
Posts: 4,336
Likes: 432
From: Philadelphia PA
also, you can scroll down the menu to "check" ot "service" and it'll tell what that might be the issue. also, try to reset it from there as well and see if it comes back or doesnt go through with the reset. do the brakes feel lower than normal?
 
  #5  
Old 09-15-2016 | 09:13 PM
Semaphore's Avatar
Semaphore
2nd Gear
Joined: Jan 2015
Posts: 124
Likes: 0
From: Northwest
This worked for me, https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

You can reset the code as well with the right app.
 
  #6  
Old 09-16-2016 | 06:35 AM
Bgould's Avatar
Bgould
Thread Starter
|
Neutral
Joined: Sep 2016
Posts: 8
Likes: 0
I attached a picture of the light. I checked the fuses, and there were no service resets. I have a similar code reader but didn't find any codes. I will download a different app and see if that makes a difference. This weekend I will inspect the brakes and see how they look. Thanks for your help so far.
 
Attached Thumbnails Yellow Brake Light with Yellow ! with circle on Startup-light.jpg  
  #7  
Old 09-16-2016 | 06:40 AM
MiniToBe's Avatar
MiniToBe
6th Gear
iTrader: (2)
Joined: Jan 2015
Posts: 4,336
Likes: 432
From: Philadelphia PA
I think this is for the anti roll system. When you are up hill, does the car roll back when you put in the first gear and release the brake while the clutch is pressed?
 
  #8  
Old 09-16-2016 | 07:58 AM
Bgould's Avatar
Bgould
Thread Starter
|
Neutral
Joined: Sep 2016
Posts: 8
Likes: 0
I am almost positive that the car rolls back when on a hill. I will give it a try in a little while. Is that an expensive/difficult issue to fix?
 
  #9  
Old 09-16-2016 | 08:21 AM
MiniToBe's Avatar
MiniToBe
6th Gear
iTrader: (2)
Joined: Jan 2015
Posts: 4,336
Likes: 432
From: Philadelphia PA
Check the fuses also. Remove and reinstall the fuse to reset the system. There are few things to look at to fix the issue IF confirmed that there is an issue. One is to reprogram the abs module, two is to look at the transmission dual mass plate, three is to ignore the issue and just drive :-)
 
  #10  
Old 09-16-2016 | 11:52 AM
Bgould's Avatar
Bgould
Thread Starter
|
Neutral
Joined: Sep 2016
Posts: 8
Likes: 0
The car definitely rolls backwards on a hill so that must be the issue. I pulled the fuse and that didn't reset the problem.
 
  #11  
Old 09-16-2016 | 12:26 PM
MiniToBe's Avatar
MiniToBe
6th Gear
iTrader: (2)
Joined: Jan 2015
Posts: 4,336
Likes: 432
From: Philadelphia PA
I did a test with my 09 clubman s 6sp. i removed the fuse and the light came on with yellow brake light. i put it back and it went away.






so there is something there to be looked at. what was the reason you got the light?

I did not check fuse F16 though to see the outcome.
 
  #12  
Old 09-16-2016 | 01:25 PM
Bgould's Avatar
Bgould
Thread Starter
|
Neutral
Joined: Sep 2016
Posts: 8
Likes: 0
I removed f16 as well. The light was on when I purchased the car.
 
  #13  
Old 09-16-2016 | 01:28 PM
MiniToBe's Avatar
MiniToBe
6th Gear
iTrader: (2)
Joined: Jan 2015
Posts: 4,336
Likes: 432
From: Philadelphia PA
aha...how far from philly PA are you?
 
  #14  
Old 09-19-2016 | 12:43 PM
Bgould's Avatar
Bgould
Thread Starter
|
Neutral
Joined: Sep 2016
Posts: 8
Likes: 0
I am a few hours from Philly. I also do not think the traction control is working correctly either. On wet roads the wheels spin and the wheel turns hard to the right.
 
  #15  
Old 09-19-2016 | 12:51 PM
MiniToBe's Avatar
MiniToBe
6th Gear
iTrader: (2)
Joined: Jan 2015
Posts: 4,336
Likes: 432
From: Philadelphia PA
There are few elements to the ABS unit and these are some of them. I dont want to say your ABS is shot, but it is worth having it reprogrammed. there is also a YAW sensor under the passenger seat that may not be working properly. Was there water intrusion any where in that area? Can you also confirm the plug is tight are the ABS module. Do you have any programming tools like NCS expert and WinKFP?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smarsha11
MINI Parts for Sale
1
09-18-2016 09:49 PM
Jolio
MINIs & Minis for Sale
2
09-08-2016 05:49 PM
JMiniCoop
R56 :: Hatch Talk (2007+)
3
08-24-2016 03:35 PM
alexinvancouver
Vancouver Mini Cooper Club
0
08-16-2016 03:32 PM
Mini Mania
Classic Mini Talk
0
08-16-2016 02:20 PM




All times are GMT -7. The time now is 10:39 AM.