Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Clubman (R55), Cooper and Cooper S(R56), and Cabrio (R57).

Post Tensioner, Valve Cover, Vacuum Pump Service “engine noise”

Thread Tools
 
Search this Thread
 
  #1  
Old 12-30-2017, 07:36 PM
Rrtec's Avatar
Rrtec
Rrtec is offline
1st Gear
Thread Starter
Join Date: Oct 2017
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Post Tensioner, Valve Cover, Vacuum Pump Service “engine noise”

I am looking for any insight. Had the car down for the Services listed above. I replaced the tensioner with the new part number with the longer shafted unit.

i am attaching a video. Does this sound like a normal engine? Obviously the noises are more pronounced on the video.


——————————————-

i would appreciate any thoughts. My wife thinks I’m being paranoid and says it sounds like her 2010 did... there is no cold start rattle, or engine shaking, just the sound in the video. I the chain was tight I checked it while the VC was off.
 

Last edited by Rrtec; 12-30-2017 at 08:19 PM.
  #2  
Old 12-30-2017, 11:23 PM
Scudder44's Avatar
Scudder44
Scudder44 is offline
4th Gear
Join Date: Nov 2015
Location: Malaga, Spain
Posts: 446
Received 69 Likes on 63 Posts
sounds like normal tappit noise to me. Mine sounds the same with the hood/bonnet up.
 
  #3  
Old 12-30-2017, 11:45 PM
renchjeep's Avatar
renchjeep
renchjeep is offline
6th Gear
iTrader: (4)
Join Date: May 2014
Location: Aguanga, CA
Posts: 1,114
Received 46 Likes on 38 Posts
They are noisy little things! Even my 2011 S with the N18 scares me when I open the hood while idling. Some of the noise you are hearing is the fuel injectors cracking. With a HPFP and direct injection, almost sounds like a diesel to me. I say it sounds normal, but DO check your oil level, and do it OFTEN!
 
  #4  
Old 12-31-2017, 05:59 AM
Rrtec's Avatar
Rrtec
Rrtec is offline
1st Gear
Thread Starter
Join Date: Oct 2017
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Oil level is good, I just changed it yesterday and made sure to triple check!
 
  #5  
Old 12-31-2017, 06:09 AM
holkki's Avatar
holkki
holkki is offline
2nd Gear
Join Date: Dec 2011
Location: Finland
Posts: 68
Received 0 Likes on 0 Posts
Yep ,sounds quite normal...I have fully rebuild N14 and i have this "tapping noise", maybe little be lower ,but still it is on...
 
  #6  
Old 12-31-2017, 07:06 AM
seandallen's Avatar
seandallen
seandallen is offline
3rd Gear
Join Date: Apr 2017
Location: Cheyenne, Wyoming
Posts: 155
Received 37 Likes on 25 Posts
It does sound a little noisy to me, but it could be just because it sounds a little more pronounced on the video. When you back away and rev the engine, THAT sounds pretty good.

I'm super paranoid about my engine noise, too, but I've gotten a little more used to the tappet noise as time has gone on.

How does this noise compare to your engine noise before you changed the tensioner?
 
  #7  
Old 01-01-2018, 12:38 PM
Rrtec's Avatar
Rrtec
Rrtec is offline
1st Gear
Thread Starter
Join Date: Oct 2017
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by seandallen
It does sound a little noisy to me, but it could be just because it sounds a little more pronounced on the video. When you back away and rev the engine, THAT sounds pretty good.

I'm super paranoid about my engine noise, too, but I've gotten a little more used to the tappet noise as time has gone on.

How does this noise compare to your engine noise before you changed the tensioner?
I honestly don’t remember. It was delivered, I drove it one day to work, and then put it in the garage to do the work.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
John_theCapn
MINI Parts for Sale
6
11-12-2020 01:05 PM
Gabe3
Stock Problems/Issues
6
02-25-2019 01:24 PM
rvorse
R60/R61 Stock Problems/Issues
1
11-29-2017 07:58 AM
idickers
Stock Problems/Issues
0
02-06-2016 08:54 AM
toddcann
Stock Problems/Issues
9
03-22-2014 10:33 AM



Quick Reply: Post Tensioner, Valve Cover, Vacuum Pump Service “engine noise”



All times are GMT -7. The time now is 06:21 AM.