Clutch Pedal Vibrating when pressed
#1
Clutch Pedal Vibrating when pressed
I have a 2013 R56 with 110k miles and the clutch has never been replaced. I always rev match and stay easy on the clutch. But today I noticed when I press the clutch in, the pedal vibrates a decent amount and I can also hear a sound like something is rubbing. The clutch doesnt slip when I apply power, but the pedal vibrates when its pressed all the way down. Could it be the throwout bearing or do I need a new clutch soon? Thanks for any help
#2
My guess would be release lever is bent, which seems to be common on these transmissions. Mine bent and was rubbing in the bellhousing, and if I pressed hard enough, would contact the pressure plate and make a god-awful racket.
Based on your signature modifications, I would suggest a Clutchmaster kit: FX100 with a steel flywheel if the car is your daily driver.
Based on your signature modifications, I would suggest a Clutchmaster kit: FX100 with a steel flywheel if the car is your daily driver.
Thread
Thread Starter
Forum
Replies
Last Post
iDriveR56
Stock Problems/Issues
2
05-04-2021 07:15 PM
lucky strike
1st Gen Countryman (R60) Talk (2010-2015)
0
06-07-2016 03:14 PM