P0172 Code (System Too Rich (Bank 1))
#1
Joined: Jul 2004
Posts: 603
Likes: 0
From: Cullman/Birmingham Alabama
P0172 Code (System Too Rich (Bank 1))
I had a P0172 code come up yesterday. So far I know that it is a System running to rich code. Here is what I don't know. Why am I getting this code?
Just last week I installed Denso Iridium Spark Plug IK22. I know that the Ik22 run colder so could that be a problem.
Here are the other mods I have but never had a problem before.
BMP CAI,Screamin' Demon Coil pack,Live Wires Spark plug wires,and I have MTH cartune installed.
Any ideas?
Just last week I installed Denso Iridium Spark Plug IK22. I know that the Ik22 run colder so could that be a problem.
Here are the other mods I have but never had a problem before.
BMP CAI,Screamin' Demon Coil pack,Live Wires Spark plug wires,and I have MTH cartune installed.
Any ideas?
#3
Joined: Jul 2004
Posts: 603
Likes: 0
From: Cullman/Birmingham Alabama
#4
BULLETIN : R52, R53 equipped with 6 speed manual trans produced from 3/05 up to 9/05.
SITUATION : DME (MS5150) fault code P0136 ( O2 sensor bank 1 post cat malfunction ) may be stored after starting the vehicle colde and driving a short distance to a downhill slope causing the vehicle to enter a deceleration or fuel cutoff situation for an extended period. If such a condition is encountered in two consecutive drive cirles, the CEL is going to be iiluminated.
CAUSE: DME calibration.
CORRECTION : Reprgram the DME with a newer version software ( or update )
SITUATION : DME (MS5150) fault code P0136 ( O2 sensor bank 1 post cat malfunction ) may be stored after starting the vehicle colde and driving a short distance to a downhill slope causing the vehicle to enter a deceleration or fuel cutoff situation for an extended period. If such a condition is encountered in two consecutive drive cirles, the CEL is going to be iiluminated.
CAUSE: DME calibration.
CORRECTION : Reprgram the DME with a newer version software ( or update )
#5
Joined: Jul 2004
Posts: 603
Likes: 0
From: Cullman/Birmingham Alabama
Thanks, I will keep that in mind. After clearing the code about three days ago it hasn't come back. But I know that it could happen again so I may need to have it reprogrammed.
Originally Posted by 1FSTMINI
BULLETIN : R52, R53 equipped with 6 speed manual trans produced from 3/05 up to 9/05.
SITUATION : DME (MS5150) fault code P0136 ( O2 sensor bank 1 post cat malfunction ) may be stored after starting the vehicle colde and driving a short distance to a downhill slope causing the vehicle to enter a deceleration or fuel cutoff situation for an extended period. If such a condition is encountered in two consecutive drive cirles, the CEL is going to be iiluminated.
CAUSE: DME calibration.
CORRECTION : Reprgram the DME with a newer version software ( or update )
SITUATION : DME (MS5150) fault code P0136 ( O2 sensor bank 1 post cat malfunction ) may be stored after starting the vehicle colde and driving a short distance to a downhill slope causing the vehicle to enter a deceleration or fuel cutoff situation for an extended period. If such a condition is encountered in two consecutive drive cirles, the CEL is going to be iiluminated.
CAUSE: DME calibration.
CORRECTION : Reprgram the DME with a newer version software ( or update )
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
07-16-2020 01:54 PM
imanexcellentdriver
1st Gen Countryman (R60) Talk (2010-2015)
10
08-31-2015 09:08 PM