Suspension Springs, struts, coilovers, sway-bars, camber plates, and all other modifications to suspension components for Clubman (R55), Cooper and Cooper S (R56), and Cabrio (R57) MINIs.

Suspension Gallery! Show me your lowered MINI!

Thread Tools
 
Search this Thread
 
  #1276  
Old 01-26-2012, 07:08 PM
RedAndBlackMiniS's Avatar
RedAndBlackMiniS
RedAndBlackMiniS is offline
4th Gear
iTrader: (2)
Join Date: Dec 2010
Posts: 587
Likes: 0
Received 2 Likes on 1 Post
I just purchased Falkin 205/40/17 512 tires for the wheels. Do you think this would give me adaquate stretch?
Love your set up BTW. I'm actually getting my wheels machined to be et25.
Originally Posted by Creeve
What tires? Most 205/40's won't do much stretching on a 8" wheel

205/40 falken 452 et30 - really barely worth calling a stretch:



Really don't have a picture that shows it very well. You have to kind of take my word on it.

Sounds like you are trying to be about an inch lower then me. If that is the case you are going to definitely want some camber front and rear and a 205 that stretches well like the falken 512.
 
  #1277  
Old 01-26-2012, 09:30 PM
Rally@StanceDesign's Avatar
Rally@StanceDesign
Rally@StanceDesign is offline
Former Vendor
Join Date: Jan 2004
Location: oh10
Posts: 8,337
Likes: 0
Received 4 Likes on 4 Posts
205 falken 512s are really like 185 wide. They'll stretch a good amount. That's what I've always run.
 
  #1278  
Old 01-29-2012, 09:28 PM
g-bodrummer's Avatar
g-bodrummer
g-bodrummer is offline
2nd Gear
Join Date: Jan 2011
Posts: 55
Likes: 0
Received 0 Likes on 0 Posts
local

good ol chestnut ridge! if i might ask, why are you selling?

Originally Posted by drewstermalloy



 
  #1279  
Old 01-30-2012, 06:52 AM
drewstermalloy's Avatar
drewstermalloy
drewstermalloy is offline
6th Gear
iTrader: (4)
Join Date: Nov 2008
Location: Buffalo, New York
Posts: 2,881
Likes: 0
Received 16 Likes on 14 Posts
Originally Posted by g-bodrummer
good ol chestnut ridge! if i might ask, why are you selling?
Yep! I love the ridge!

Just selling to finally get myself into a Lotus.
 
  #1280  
Old 01-30-2012, 09:11 AM
sludge1300's Avatar
sludge1300
sludge1300 is offline
1st Gear
Join Date: Jan 2012
Location: Houston, TX
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
Just installed my BC Racing BR's with Swift Springs. Sitting on Enkei PF01 17x7 et45. Hankook Ventus Evo V12 205-45-17

Wheels do not require spacers!

Coilovers are set to about 1/4" above lowest ride height in the front (with no preload), and 3/8" above lowest in the back (also no preload). I'm pretty surprised how low they go, considering what people have said about the BC's. I think I might raise the front a bit, lots of rake right now.


Name:  3d4db182.jpg
Views: 1018
Size:  84.8 KB
 
  #1281  
Old 01-30-2012, 12:59 PM
mini4tide's Avatar
mini4tide
mini4tide is offline
3rd Gear
iTrader: (4)
Join Date: Sep 2010
Location: Roll Tide, Alabama
Posts: 294
Likes: 0
Received 0 Likes on 0 Posts
Ahh, Lotus! Love those! Hello insurance increase! Good luck!
 
  #1282  
Old 01-30-2012, 01:10 PM
drewstermalloy's Avatar
drewstermalloy
drewstermalloy is offline
6th Gear
iTrader: (4)
Join Date: Nov 2008
Location: Buffalo, New York
Posts: 2,881
Likes: 0
Received 16 Likes on 14 Posts
Originally Posted by mini4tide
Hello insurance increase!
Yeah, especially for a 22 year old male... ugh
 
  #1283  
Old 01-30-2012, 09:20 PM
corin.mcblide's Avatar
corin.mcblide
corin.mcblide is offline
4th Gear
Join Date: Feb 2008
Location: seattle, wa
Posts: 432
Likes: 0
Received 0 Likes on 0 Posts
lowered in the snow

Gallery! Show me your lowered MINI!-o7dc0.jpg
 
  #1284  
Old 01-30-2012, 10:01 PM
Rally@StanceDesign's Avatar
Rally@StanceDesign
Rally@StanceDesign is offline
Former Vendor
Join Date: Jan 2004
Location: oh10
Posts: 8,337
Likes: 0
Received 4 Likes on 4 Posts
That looks sick

Where do you live? SoCal or WA? I wanna shoot your car.
 
  #1285  
Old 01-31-2012, 06:07 AM
Drewbrese's Avatar
Drewbrese
Drewbrese is offline
3rd Gear
iTrader: (1)
Join Date: Mar 2011
Location: Boston
Posts: 191
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by minsanity

Yep, thats how the MINI should come, IMO its too tall of a car as is.
 
  #1286  
Old 01-31-2012, 02:12 PM
corin.mcblide's Avatar
corin.mcblide
corin.mcblide is offline
4th Gear
Join Date: Feb 2008
Location: seattle, wa
Posts: 432
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Rally@StanceDesign
That looks sick

Where do you live? SoCal or WA? I wanna shoot your car.
hey rally,

currently im up in seattle for school but i come from socal so whenever i'm down there, shes down there.
 
  #1287  
Old 01-31-2012, 02:23 PM
Sanderskog's Avatar
Sanderskog
Sanderskog is offline
4th Gear
iTrader: (1)
Join Date: May 2002
Location: Sammamish, WA
Posts: 381
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by corin.mcblide
Man I love those wheels on the Pepper White.
 
  #1288  
Old 01-31-2012, 02:24 PM
sooper_cooper's Avatar
sooper_cooper
sooper_cooper is offline
5th Gear
iTrader: (3)
Join Date: Jan 2011
Location: Dallas, TX
Posts: 845
Likes: 0
Received 1 Like on 1 Post
Originally Posted by sludge1300
Just installed my BC Racing BR's with Swift Springs. Sitting on Enkei PF01 17x7 et45. Hankook Ventus Evo V12 205-45-17

Wheels do not require spacers!

Coilovers are set to about 1/4" above lowest ride height in the front (with no preload), and 3/8" above lowest in the back (also no preload). I'm pretty surprised how low they go, considering what people have said about the BC's. I think I might raise the front a bit, lots of rake right now.


Nice! So how's the ride with the Swift springs and damper settings you're using?
 
  #1289  
Old 01-31-2012, 02:25 PM
corin.mcblide's Avatar
corin.mcblide
corin.mcblide is offline
4th Gear
Join Date: Feb 2008
Location: seattle, wa
Posts: 432
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Sanderskog
Man I love those wheels on the Pepper White.
thanks!!
 
  #1290  
Old 01-31-2012, 02:36 PM
minimike21's Avatar
minimike21
minimike21 is offline
5th Gear
Join Date: Nov 2010
Posts: 844
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by corin.mcblide
This is how it's done. Did I miss the specs?
 
  #1291  
Old 01-31-2012, 02:47 PM
corin.mcblide's Avatar
corin.mcblide
corin.mcblide is offline
4th Gear
Join Date: Feb 2008
Location: seattle, wa
Posts: 432
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by minimike21
This is how it's done. Did I miss the specs?

thanks! appreciate it! the weels are work xd-9s 17x8.5 et32, tires are falken 512s 205/40/17. suspension is kwv1 coilovers.
 
  #1292  
Old 01-31-2012, 02:53 PM
Mindspin311's Avatar
Mindspin311
Mindspin311 is offline
5th Gear
iTrader: (1)
Join Date: Feb 2011
Location: Roswell, GA
Posts: 734
Received 3 Likes on 3 Posts
Originally Posted by sludge1300
Just installed my BC Racing BR's with Swift Springs. Sitting on Enkei PF01 17x7 et45. Hankook Ventus Evo V12 205-45-17

Wheels do not require spacers!

Coilovers are set to about 1/4" above lowest ride height in the front (with no preload), and 3/8" above lowest in the back (also no preload). I'm pretty surprised how low they go, considering what people have said about the BC's. I think I might raise the front a bit, lots of rake right now.


I am considering BC/Swift. Tell me more about the setup, how are you liking it so far? Where did you buy everything?
 
  #1293  
Old 01-31-2012, 02:56 PM
Rally@StanceDesign's Avatar
Rally@StanceDesign
Rally@StanceDesign is offline
Former Vendor
Join Date: Jan 2004
Location: oh10
Posts: 8,337
Likes: 0
Received 4 Likes on 4 Posts
Originally Posted by corin.mcblide
hey rally,

currently im up in seattle for school but i come from socal so whenever i'm down there, shes down there.
Well whenever you're back down this way, hit me up if you wanna hang out and shoot some photos of your car. It looks great and I'd love to see it in person and hang out
 
  #1294  
Old 01-31-2012, 03:25 PM
minimike21's Avatar
minimike21
minimike21 is offline
5th Gear
Join Date: Nov 2010
Posts: 844
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by corin.mcblide
thanks! appreciate it! the weels are work xd-9s 17x8.5 et32, tires are falken 512s 205/40/17. suspension is kwv1 coilovers.
nice! im in the budgeting mode right now so i can hopefully afford some KW V1's this summer... for now ill deal with my 4x4
 
  #1295  
Old 01-31-2012, 03:39 PM
Albiecrazy's Avatar
Albiecrazy
Albiecrazy is offline
6th Gear
Join Date: Mar 2009
Location: Eastern Long Island, NY
Posts: 1,980
Likes: 0
Received 1 Like on 1 Post
Finally got some better pics with newly powder coated Bridge Spokes. Here's one of them.

 
  #1296  
Old 01-31-2012, 08:13 PM
ColinMc's Avatar
ColinMc
ColinMc is offline
4th Gear
Join Date: Dec 2007
Location: Albany, NY
Posts: 497
Likes: 0
Received 0 Likes on 0 Posts
Just installed Megan Racing coilovers, set at just below the middle of the adjustment, no spring preload. Konig Swurve 18x7.5 on Kumho 215/35/18 all season tires.

Might take it just a little lower...but want to see how things settle in first. So far VERY happy with the ride quality, just finished the install a couple hours ago. Better pics to come but I wanted to show off NOW

Name:  IMG_20120131_184310.jpg
Views: 775
Size:  41.4 KB
 
  #1297  
Old 02-01-2012, 09:23 AM
Boosted_Mini's Avatar
Boosted_Mini
Boosted_Mini is offline
5th Gear
Join Date: Feb 2011
Location: Long Beach, CA
Posts: 712
Likes: 0
Received 7 Likes on 2 Posts
Originally Posted by corin.mcblide
thanks! appreciate it! the weels are work xd-9s 17x8.5 et32, tires are falken 512s 205/40/17. suspension is kwv1 coilovers.
LOVE IT! I am looking at some Work Emotion CR KAI 17x8 +30 for the MINI. Love work wheels and love the XD9s! Finally more people running legit wheels on here!

Same tire and suspension setup as you too!

Looks great.
 
  #1298  
Old 02-01-2012, 12:14 PM
corin.mcblide's Avatar
corin.mcblide
corin.mcblide is offline
4th Gear
Join Date: Feb 2008
Location: seattle, wa
Posts: 432
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Boosted_Mini
Finally more people running legit wheels on here!
yeah i know what you mean, i felt like i was the only one
 
  #1299  
Old 02-01-2012, 12:16 PM
corin.mcblide's Avatar
corin.mcblide
corin.mcblide is offline
4th Gear
Join Date: Feb 2008
Location: seattle, wa
Posts: 432
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by ColinMc
Just installed Megan Racing coilovers, set at just below the middle of the adjustment, no spring preload. Konig Swurve 18x7.5 on Kumho 215/35/18 all season tires.

Might take it just a little lower...but want to see how things settle in first. So far VERY happy with the ride quality, just finished the install a couple hours ago. Better pics to come but I wanted to show off NOW

looking good! go lower! btw im a ColinMc too if you couldn't tell by my username
 
  #1300  
Old 02-01-2012, 02:54 PM
Boosted_Mini's Avatar
Boosted_Mini
Boosted_Mini is offline
5th Gear
Join Date: Feb 2011
Location: Long Beach, CA
Posts: 712
Likes: 0
Received 7 Likes on 2 Posts
Originally Posted by corin.mcblide
yeah i know what you mean, i felt like i was the only one
Me too!!! haha. Granted your works were probably a hair more than my wheels I still love yours! I am working on finding something x8.. I love my 5Zigen Proracers since they were used by the team 5zigen r53 racecar.. but I want something new. almost bought some SSR SP1s from a friend but realized i wouldnt be happy with another 7.5 wheel and want 8-9.
 


Quick Reply: Suspension Gallery! Show me your lowered MINI!



All times are GMT -7. The time now is 12:22 AM.