I'm using the stock R56 camber adjustment slots (pushed inboard to their max) and I'm interested in adding a strut tower brace. I believe that most STB's are a fixed length that matches the factory strut location. Also, the center circle on the strut tower bracket itself won't easily accommodate sliding the top of the strut over due to interference.

Are there any strut tower braces that play well with the factory camber adjustment?

 

Only the JCW ones work with that adjustment.

 

Thanks Izzy. I suspected that but I wasn't sure if I'd scoured all corners of the aftermarket earth yet Does the JCW clear aftermarket intakes?

 

I think the M7 brace might work. I only have the reinforcement plates right now, but they fit over the adjusted struts just fine.

 

The M7's don't work. As for the aftermarket intakes, JCW brace clears them IIRC.

 

Thanks for the info guys... I'll probably just get some IE fixed camber plates and call it a day (although the STBs do 'look' cool!)

 

iirc, the NM one is adjustable.

 

going off of the pix, it doesnt appear to allow for the adjustment.

 

per JC

 

What strut brace would work best if I have the JCW kit? I saw that the JCW STB does not fit with it?