When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I PARTIMG OUT my 2006 R53 with an RMW 1.62l and a TVS900 made 320whp on E85 Flex fuel kit (ran on E85 or Premium fuel). RMW Motor and upgrades have about 20k miles. Less than 500 miles on the new fx400 Stage 4 clutch 8 puck kit and slave cylinder.
PLEASE BE PATIENT AS I AM TAKING THE CAR APART SLOWLY AS PARTS ARE BEING SOLD.
RMW 1.62l engine with Full Race Camshaft and ATI Damper - RMW is selling about $8,000 plus tax. I'm asking $5,900
Clutch Masters FX400 8 puck clutch kit (Less than 500 miles on it) - RMW is selling $1,050 plus tax - I'm asking $700 TVS900 with 55mmpulley - SOLD RMW belt tensioner - SOLD OS Giken LSD - RMW is selling $1,750 plus tax - I'm asking $1,200 Link ECU with with wideband sensor and laptop cable- RMW asking $1650 for Link ECU alone. I'm asking $1200 Flex fuel kit with Link pressure sensor (run on E85 or Premium fuel) - RMW is selling $1,650 plus tax - I'm asking $1,200 RMW catless shorty header (cat went bad and added new pipe instead) - RMW is selling $1,195 plus tax - I'm asking $650 RMW 500hp axles - RMW is selling $795 plus tax - I'm asking $500
THANK YOU,
Jawed
Picture
Title
Part Category
Price
Part Description
Sold
PART OUT: 2006 Mini Cooper S R53 RMW 1.62l with a TVS900
Accessories
$11
Hello Everyone,
I PARTIMG OUT my 2006 R53 with an RMW 1.62l and a TVS900 made 320whp on E85 Flex fuel kit (ran on E85 or Premium fuel). RMW Motor and upgrades have about 20k miles. Less than 500 miles on the new fx400 Stage 4 clutch 8 puck kit and slave cylinder.
PLEASE BE PATIENT AS I AM TAKING THE CAR APART SLOWLY AS PARTS ARE BEING SOLD.
RMW 1.62l engine with Full Race Camshaft and ATI Damper - RMW is selling about $8,000 plus tax. I'm asking $5,900
Clutch Masters FX400 8 puck clutch kit (Less than 500 miles on it) - RMW is selling $1,050 plus tax - I'm asking $700 TVS900 with 55mmpulley - SOLD RMW belt tensioner - SOLD OS Giken LSD - RMW is selling $1,750 plus tax - I'm asking $1,200 Link ECU with with wideband sensor and laptop cable- RMW asking $1650 for Link ECU alone. I'm asking $1200 Flex fuel kit with Link sensor (run on E85 or Premium fuel) - RMW is selling $1,650 plus tax - I'm asking $1,200 RMW catless shorty header (cat went bad and replaced with pipe) - RMW is selling $1,195 plus tax - I'm asking $650 RMW 500hp axles - RMW is selling $795 plus tax - I'm asking $500
ONLY SELLING THE PARTS LISTED ABOVE
THANK YOU,
Jawed
Last edited by Jawz11; 09-25-2024 at 03:13 PM.
Reply
BTW, for anybody wondering. I just recently purchased his tvs900.
jawZ is a legit seller and cool dude.... his post count may be low which alot of times can be sketchy but I just did a large transaction with him and it went very smoothly. I'd definitely do businesses with him again...so if you have been eyeballing something specific , pull the trigger !
thanks again Ahmad...
Hi,
Yes it will bolt right up with no issues. I want $4k for the short block, but I've never sent a block before. I need to look into it when I get a chance, unless you know of a way.
Great timing, yes I do. Everything, except the TVS kit. I was a little preoccupied with the family and completely left the car on the back burner. I started taking the motor out over the the weekend. Anything you're interested in particular?
Great timing, yes I do. Everything, except the TVS kit. I was a little preoccupied with the family and completely left the car on the back burner. I started taking the motor out over the the weekend. Anything you're interested in particular?
Jawed
Yes, the weatherstripping that is under the hood and behind the engine. I circled it in yellow and arrowed it in red below.
Hi,
Yes I do. I didn't have much time taking the car apart lately, but I am in the process of it. If you're really interested, I can have it out pretty quick.
11-11-2023 | 07:35 AM
