Show me your WHEELS!
#5876
But simple math states that with 3 inches of lip and a non-convex wheel face, the mounting face of a 17x7 would be about .5" out from the midpoint of the wheel at 3.5" (7" - 3" of lip = 4") (4" - 3.5" midpoint= .5" offset) (.5" is about 12mm.....so an et12)
Last edited by Rally@StanceDesign; 05-05-2008 at 11:33 AM.
#5878
And probably not a representative photo of the exact wheel that would fit on our cars. First, it is a 5-lug pattern so I know that wheel is not for a Mini. This FLik FTD wheel is similar and probably the best example of how close you can get with that style:
#5880
we're not discussing the lug pattern, it's the flat-face+lip+offset factors
#5881
It is possible, but it is also possible that it wouldn't fit MCS brakes. I just finished a very long wheel search and came to the conclusion that sample photos don't mean squat, even if they look like they might work.
#5886
What the he!! is going on? RallyStance says it can't be done (flat face, 2.5" lip), you post a non-flat face wheel, I argue that a Mini fitment may not have the lip you show and post a photo of a similar wheel.
Like you said, whatever. I guess I will sit back and wait for the photos of a flat-faced wheel with a 2.5" lip that properly fits a Mini.
Like you said, whatever. I guess I will sit back and wait for the photos of a flat-faced wheel with a 2.5" lip that properly fits a Mini.
#5887
What the he!! is going on? RallyStance says it can't be done (flat face, 2.5" lip), you post a non-flat face wheel, I argue that a Mini fitment may not have the lip you show and post a photo of a similar wheel.
Like you said, whatever. I guess I will sit back and wait for the photos of a flat-faced wheel with a 2.5" lip that properly fits a Mini.
Like you said, whatever. I guess I will sit back and wait for the photos of a flat-faced wheel with a 2.5" lip that properly fits a Mini.
not that im trying to rub you the wrong way, but i think you misinterpreted and misread into my post
#5890
Hmm, I don't recall mentioning anything about a flat faced wheel.
I agree w/needing more than 17"x7" for a 3" lip "flat face", but what I don't agree w/is that a convex wheel with a 3" lip would look goofy. IF that's what was meant.
Please excuse the iPhone pics:
Current Wheels
Wheels Wanted (BTW -these are closer to a 4" lip "appearance") Please PM me if you know where I can get a set.
color or scratches ok. (Volution VR-5)
Comparison
I like the look and that's all that matters.
Minian
I agree w/needing more than 17"x7" for a 3" lip "flat face", but what I don't agree w/is that a convex wheel with a 3" lip would look goofy. IF that's what was meant.
Please excuse the iPhone pics:
Current Wheels
Wheels Wanted (BTW -these are closer to a 4" lip "appearance") Please PM me if you know where I can get a set.
color or scratches ok. (Volution VR-5)
Comparison
I like the look and that's all that matters.
Minian
Last edited by Minian; 05-05-2008 at 07:23 PM.
#5891
I started my post with "unless the wheel is convex". As I had assumed...it's just a convex wheel and not the deep 3" lip that Wake|MCS was thinking about.
All that said....I agree, those do look good
#5892
I didn't say that....what I said would look goofy is a 17x7 flat face wheel with 3" of lip because it would require such a low offset.
I started my post with "unless the wheel is convex". As I had assumed...it's just a convex wheel and not the deep 3" lip that Wake|MCS was thinking about.
All that said....I agree, those do look good
I started my post with "unless the wheel is convex". As I had assumed...it's just a convex wheel and not the deep 3" lip that Wake|MCS was thinking about.
All that said....I agree, those do look good
Excuse me, I guess I can't down Brew and Blog at the same time
#5898
2nd Gear
iTrader: (-1)
Join Date: Jan 2007
Location: Chapel Hill, NC
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the comments, too.
Last edited by bthayer23; 05-07-2008 at 06:09 AM. Reason: forgot to say thanks
#5899
3rd Gear
iTrader: (3)
Join Date: Feb 2006
Location: Victoria, BC
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
So the snow is finally gone and my new wheels/tires are on!! I actually had them installed on May 3rd, my Mini's birthday. Seems quite appropriate!
They are Drag DR-20, 16 X 7 with Hankook RS-2 215/45.
Hopefully later this spring/summer, I will get some new springs.
They are Drag DR-20, 16 X 7 with Hankook RS-2 215/45.
Hopefully later this spring/summer, I will get some new springs.
#5900
center caps on top. just paint it with some engine enamel and
it will look nice.