When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Those look awesome hmmm me thinks gold centers would look pretty sweet too, but then again I've got a thing for gold
figured I might as well share some shots with my current wheels, just a set of s-lites painted gold, hopefully they'll be my winter wheels soon (I'm waiting for a certain set of wheels to be released by 1552, in gold of course ).
Those are some fat tires for a wide low offset tire. Unless you raise your car up, you'll probably keep rubbing.
Yea i did my calculations wrong with the tires based it off a 195/65 stock but there 55. I ordered a set of coilovers that start at .7 so should fix the slight rubbing. Fail on my part
Yea i did my calculations wrong with the tires based it off a 195/65 stock but there 55. I ordered a set of coilovers that start at .7 so should fix the slight rubbing. Fail on my part
That's no problem, just use the old baseball bat trick to clearance your fender-wells.
Yea i did my calculations wrong with the tires based it off a 195/65 stock but there 55. I ordered a set of coilovers that start at .7 so should fix the slight rubbing. Fail on my part
Your best bet is to probably sell your tires and get the correct tires. The rubbing will ruin the edge of your tires and destroy your fenders as well. Just a suggestion...
Your best bet is to probably sell your tires and get the correct tires. The rubbing will ruin the edge of your tires and destroy your fenders as well. Just a suggestion...
That is my other thought. Im coming from a dodge magnum where bigger was better
That is my other thought. Im coming from a dodge magnum where bigger was better
If you want it to look flush, I would suggest looking at 204-40-17. Not sure if you like the stretched look but it will look very good once you install your coilovers and drop your car.
What BBS are those? I like them. Want to trae for some OZs?
They are BBS RS. 16x7.5 et 14 front and 16x8.5 et 14 in the back. Thanks
Originally Posted by Gitmoe
That's nice. Did you get that low just with the Vmaxx drop? Any other suspension mods needed to sit like that?
The combination of skinny tires (195/40), 16" wheels, and coilovers. Nothing special. I still have a little room to go down, a lot in the back, which I'll do when I get more camber in the rear. Front have another 2-4 threads. Rears have about 5-7.
They are BBS RS. 16x7.5 et 14 front and 16x8.5 et 14 in the back. Thanks
The combination of skinny tires (195/40), 16" wheels, and coilovers. Nothing special. I still have a little room to go down, a lot in the back, which I'll do when I get more camber in the rear. Front have another 2-4 threads. Rears have about 5-7.
Yeah that's dope. I just didn't know if you needed special control arms or anything. I'm still trying to fully understand the MINI suspension. I'm coming from VW world where frame notching and custom suspensions are common place to ride low low...