Show me your WHEELS!
#1353
Originally Posted by joker
but the BREMBOS oh my god YO! excellent, i almost hung a set of these on my mini but the funds were low, so i went w/wheels first.....
what are u runnin' in the rear?
what are u runnin' in the rear?
#1357
Originally Posted by joker
szweeeet.....do u know the specs on fittin' the BBK like what size spacer are u runnin'? offset on wheels?
I can barely fit a credit card between the spoke and the caliper
#1358
oh sorry bout that, did seem a bit off, got the simular layout but from what i can tell so far the 003 had an awsome finish and quality as some of the more expensive wheels, i was acually in a companie who sold racing wheels and some of the markup is not fair, again not a bash, it is very nice indeed
sorry dude !
but as far as quality you are dead on a lot of the wheels we would send out for powdercoating, (alot of the tuner wheels) had alot of filler under the topcoat from the low pressure casting i presume
but sometimes the hole in the wheels were so great i would expect structural problems, its kinda scary when you take a cheap rim and knock of all the paint
also sometimes the name you pay for more than the quality of the wheel, some companies offer the same exact wheel from the same manufacturer and just brand them differentley and charge less, kinda like a bose sterio
sometimes you pay more for the name than you do the quality of the part.
thou thats not the case with your wheels at all by any means :smile:
we did a showcar 300c for SEMA and a wheel companie donated their premo rims for the car that costed retail around 10,000 and the castings were crap, crazy i tell you. in most cases you get what you pay for i did a price check back on the 003 and their retail for 350 to 400 so they were close in price just didnt realize i got such a good deal, ill look a bit more before blarring my mouth off, hehehe!
i love to see all this wonderfull machine art on these cars its so exzotic !!!!
and i also love the brembo breaks, HOT, the calipers are so darn massive thou its hard to find a rim to fit that looks hot on the car!!!
sorry dude !
but as far as quality you are dead on a lot of the wheels we would send out for powdercoating, (alot of the tuner wheels) had alot of filler under the topcoat from the low pressure casting i presume
but sometimes the hole in the wheels were so great i would expect structural problems, its kinda scary when you take a cheap rim and knock of all the paint
also sometimes the name you pay for more than the quality of the wheel, some companies offer the same exact wheel from the same manufacturer and just brand them differentley and charge less, kinda like a bose sterio
sometimes you pay more for the name than you do the quality of the part.
thou thats not the case with your wheels at all by any means :smile:
we did a showcar 300c for SEMA and a wheel companie donated their premo rims for the car that costed retail around 10,000 and the castings were crap, crazy i tell you. in most cases you get what you pay for i did a price check back on the 003 and their retail for 350 to 400 so they were close in price just didnt realize i got such a good deal, ill look a bit more before blarring my mouth off, hehehe!
i love to see all this wonderfull machine art on these cars its so exzotic !!!!
and i also love the brembo breaks, HOT, the calipers are so darn massive thou its hard to find a rim to fit that looks hot on the car!!!
#1360
NEEZ wheel
NEEZ 17inch
7.8kg
no spacer required for brembo
kind must item for big brake user in Japan. (I dun have big brake )
I like BBS RV-F in nowadays because lighter than NEEZ and it looks more easy for cleaning.
unfortunately RV-F 7.5J is not available in Japan market.
But if I order this I can get it from factory...
As they said export only but we have some spares for stock.
I dun understand this and that.
7.8kg
no spacer required for brembo
kind must item for big brake user in Japan. (I dun have big brake )
I like BBS RV-F in nowadays because lighter than NEEZ and it looks more easy for cleaning.
unfortunately RV-F 7.5J is not available in Japan market.
But if I order this I can get it from factory...
As they said export only but we have some spares for stock.
I dun understand this and that.
#1361
Originally Posted by mini_r53
NEEZ 17inch
7.8kg
no spacer required for brembo
kind must item for big brake user in Japan. (I dun have big brake )
I like BBS RV-F in nowadays because lighter than NEEZ and it looks more easy for cleaning.
unfortunately RV-F 7.5J is not available in Japan market.
But if I order this I can get it from factory...
As they said export only but we have some spares for stock.
I dun understand this and that.
7.8kg
no spacer required for brembo
kind must item for big brake user in Japan. (I dun have big brake )
I like BBS RV-F in nowadays because lighter than NEEZ and it looks more easy for cleaning.
unfortunately RV-F 7.5J is not available in Japan market.
But if I order this I can get it from factory...
As they said export only but we have some spares for stock.
I dun understand this and that.
#1362
Anyone know where to buy NEEZ wheels in the States?
Originally Posted by mini_r53
NEEZ 17inch
7.8kg
no spacer required for brembo
kind must item for big brake user in Japan. (I dun have big brake )
I like BBS RV-F in nowadays because lighter than NEEZ and it looks more easy for cleaning.
unfortunately RV-F 7.5J is not available in Japan market.
But if I order this I can get it from factory...
As they said export only but we have some spares for stock.
I dun understand this and that.
7.8kg
no spacer required for brembo
kind must item for big brake user in Japan. (I dun have big brake )
I like BBS RV-F in nowadays because lighter than NEEZ and it looks more easy for cleaning.
unfortunately RV-F 7.5J is not available in Japan market.
But if I order this I can get it from factory...
As they said export only but we have some spares for stock.
I dun understand this and that.
#1363
Originally Posted by ///ACS330Ci
Anyone know where to buy NEEZ wheels in the States?
Only $824 for a 17x7.
#1364
6th Gear
iTrader: (1)
hey JAPAN
.
Originally Posted by mini_r53
NEEZ 17inch
7.8kg
no spacer required for brembo
kind must item for big brake user in Japan. (I dun have big brake )
I like BBS RV-F in nowadays because lighter than NEEZ and it looks more easy for cleaning.
unfortunately RV-F 7.5J is not available in Japan market.
But if I order this I can get it from factory...
As they said export only but we have some spares for stock.
I dun understand this and that.
7.8kg
no spacer required for brembo
kind must item for big brake user in Japan. (I dun have big brake )
I like BBS RV-F in nowadays because lighter than NEEZ and it looks more easy for cleaning.
unfortunately RV-F 7.5J is not available in Japan market.
But if I order this I can get it from factory...
As they said export only but we have some spares for stock.
I dun understand this and that.
#1372
awesome wheels
man, those wheels are nice! too bad they are like $3,000+ for a set
i really like the rs-ones
i really like the rs-ones
Originally Posted by mini_r53
NEEZ 17inch
7.8kg
no spacer required for brembo
kind must item for big brake user in Japan. (I dun have big brake )
I like BBS RV-F in nowadays because lighter than NEEZ and it looks more easy for cleaning.
unfortunately RV-F 7.5J is not available in Japan market.
But if I order this I can get it from factory...
As they said export only but we have some spares for stock.
I dun understand this and that.
7.8kg
no spacer required for brembo
kind must item for big brake user in Japan. (I dun have big brake )
I like BBS RV-F in nowadays because lighter than NEEZ and it looks more easy for cleaning.
unfortunately RV-F 7.5J is not available in Japan market.
But if I order this I can get it from factory...
As they said export only but we have some spares for stock.
I dun understand this and that.
#1373
Originally Posted by kenchan
Alright Mario, we only post true cars here, not some chop-up.
thought you actually had some coilovers on and camber corrected on the rear...nice concept picture though.
thought you actually had some coilovers on and camber corrected on the rear...nice concept picture though.