8j 18' offset 35
#1
09-17-2007, 04:19 PM
#3
09-17-2007, 08:10 PM
Former Vendor
haha i dont touch 18s....its hard to pull off any agressive widths and offsets with 18s because they even rub when they are 7 inches wide and high offsets.
I would say "yes" they could fit....but you're gonna probably notice some rubbing at stock height and probably wouldn't be able to lower it at all. You're talking about a wheel that would stick out like 10mm from the edge of the arch......so they *might* fit alright, but i think i would keep looking.
#4
09-17-2007, 08:51 PM
What year MINI, MC or MCS?
What suspension? If lowered, how much lower?
What is your alignment? How much negative camber front and rear?
How much do you carry in the rear seat most of the time? Any people?
Do you have any rubbing now? What wheels and tires do you have now?
How rough or bad are your local roads? Very smooth or horrible?
What size tires were you thinking of using with the 18x8 rims +35 offset?
How much do the rims weigh? 18x8 can be heavy. Are you prepared for that? Or maybe you want larger wheels to clear a big brake kit?
Probably crucial is the tire size- don't get anything much taller than 24.4" outer tire diameter if possible. 18x8 rim is wider than stock by 1 inch and +35 offset means the rim will mount 12 mm more to the outside of the car than stock which is negated by the 1/2" wider it faces the inside. 205/40-18 or 215/35-18 would be good.
Net result the tire is about the same as stock on the inside but about 18 mm more facing the outside which is about one inch sticking out compared to stock. If the tire is taller than stock this means it could rub against the inner wheel liner. Depends on how much rear negative camber you have.
In the front you might rub the wider tires on the inner wheel liner on full turn.
So there you don't really want to get very wide tires to mount. If you check the JCW wheels they often come with 205mm tires to get more clearance.
Last edited by minihune; 09-17-2007 at 11:17 PM.
#5
09-18-2007, 12:52 AM
@rally.. thanks 
Well let me explain
I have 4 wheels from the tirerack.. 7,5J x 18" offset 38 and I rubbed one wheel. Now I want to buy 2 new wheels but the only size I can get in the netherlands are 8Jx 18" ofset 35.
answers :
1 MCS 2003
2 Koni adjustables lowered as much as it can take
3 dunno about the camber but because I lowered it pretty much the rear wheels are standing negative
4 No people in the back NEVER
5 No rubbing ATM tires are 215/35/18
6 Roads are smooth :D
7 I want to use 215 tires.. they'll fit but will look pretty stretched.. I like that
8 Dunno about the weight... ASA AR1
9 215/35/18
10 ...
11 The front's stay 7,5 J with 18" offset 38
THANKS for the help guys!
I'dd really like the PHAT wheels in the back..
I just took a look @ my car and I think the wheel could go further out about 1cm -12mm Would be great wouldn't it???
pic of my ride
cheers and thanks for the effort guys!
Coen
OK, we need more information.
1 What year MINI, MC or MCS?
2 What suspension? If lowered, how much lower?
3 What is your alignment? How much negative camber front and rear?
4 How much do you carry in the rear seat most of the time? Any people?
5 Do you have any rubbing now? What wheels and tires do you have now?
6 How rough or bad are your local roads? Very smooth or horrible?
7 What size tires were you thinking of using with the 18x8 rims +35 offset?
8 How much do the rims weigh? 18x8 can be heavy. Are you prepared for that? Or maybe you want larger wheels to clear a big brake kit?
9 Probably crucial is the tire size- don't get anything much taller than 24.4" outer tire diameter if possible. 18x8 rim is wider than stock by 1 inch and +35 offset means the rim will mount 12 mm more to the outside of the car than stock which is negated by the 1/2" wider it faces the inside. 205/40-18 or 215/35-18 would be good.
10 Net result the tire is about the same as stock on the inside but about 18 mm more facing the outside which is about one inch sticking out compared to stock. If the tire is taller than stock this means it could rub against the inner wheel liner. Depends on how much rear negative camber you have.
11 In the front you might rub the wider tires on the inner wheel liner on full turn.
So there you don't really want to get very wide tires to mount. If you check the JCW wheels they often come with 205mm tires to get more clearance.
1 What year MINI, MC or MCS?
2 What suspension? If lowered, how much lower?
3 What is your alignment? How much negative camber front and rear?
4 How much do you carry in the rear seat most of the time? Any people?
5 Do you have any rubbing now? What wheels and tires do you have now?
6 How rough or bad are your local roads? Very smooth or horrible?
7 What size tires were you thinking of using with the 18x8 rims +35 offset?
8 How much do the rims weigh? 18x8 can be heavy. Are you prepared for that? Or maybe you want larger wheels to clear a big brake kit?
9 Probably crucial is the tire size- don't get anything much taller than 24.4" outer tire diameter if possible. 18x8 rim is wider than stock by 1 inch and +35 offset means the rim will mount 12 mm more to the outside of the car than stock which is negated by the 1/2" wider it faces the inside. 205/40-18 or 215/35-18 would be good.
10 Net result the tire is about the same as stock on the inside but about 18 mm more facing the outside which is about one inch sticking out compared to stock. If the tire is taller than stock this means it could rub against the inner wheel liner. Depends on how much rear negative camber you have.
11 In the front you might rub the wider tires on the inner wheel liner on full turn.
So there you don't really want to get very wide tires to mount. If you check the JCW wheels they often come with 205mm tires to get more clearance.
Well let me explain
I have 4 wheels from the tirerack.. 7,5J x 18" offset 38 and I rubbed one wheel. Now I want to buy 2 new wheels but the only size I can get in the netherlands are 8Jx 18" ofset 35.
answers :
1 MCS 2003
2 Koni adjustables lowered as much as it can take
3 dunno about the camber but because I lowered it pretty much the rear wheels are standing negative
4 No people in the back
NEVER5 No rubbing ATM tires are 215/35/18
6 Roads are smooth :D
7 I want to use 215 tires.. they'll fit but will look pretty stretched.. I like that
8 Dunno about the weight... ASA AR1
9 215/35/18
10 ...
11 The front's stay 7,5 J with 18" offset 38
THANKS for the help guys!
I'dd really like the PHAT wheels in the back..
I just took a look @ my car and I think the wheel could go further out about 1cm -12mm Would be great wouldn't it???
pic of my ride
cheers and thanks for the effort guys!
Coen
#7
09-18-2007, 05:27 AM
they lookTrending Topics
#9
09-18-2007, 10:26 AM
OK, so the question is given your 18x7.5 +35 offset wheels with 215/35-18 tires worked before,
Will 18x8 +35 offset wheels work to replace the rear wheels without rubbing.
The Answer is probably yes. Since offset is the same for both rims then the extra 1/2" width is split with 1/4" going more in and the rest going more out. This means about 0.2" in and 0.2" out or about 6mm each way.
Even if you did get a little rubbing you can just trim the inner plastic wheel well edge with a dremmel tool a little and it would fit. Another option is to get rear lower adjustable control arms and make the rear negative camber just enough to give clearance. I think you could set it to about -1.6 to -1.8 degrees and it still would be fine for street driving. Try it as it is now and if ti clears you won't need to adjust alignment.
If you do get the 18x8 then do a fitment check in the front to see if it will clear or not. If there is no rubbing then you have the option of getting 18x8 for all four wheels but that's your choice.
Will 18x8 +35 offset wheels work to replace the rear wheels without rubbing.
The Answer is probably yes. Since offset is the same for both rims then the extra 1/2" width is split with 1/4" going more in and the rest going more out. This means about 0.2" in and 0.2" out or about 6mm each way.
Even if you did get a little rubbing you can just trim the inner plastic wheel well edge with a dremmel tool a little and it would fit. Another option is to get rear lower adjustable control arms and make the rear negative camber just enough to give clearance. I think you could set it to about -1.6 to -1.8 degrees and it still would be fine for street driving. Try it as it is now and if ti clears you won't need to adjust alignment.
If you do get the 18x8 then do a fitment check in the front to see if it will clear or not. If there is no rubbing then you have the option of getting 18x8 for all four wheels but that's your choice.
#10
09-18-2007, 11:52 AM
Former Vendor
The stretch will definitely be enough to make sure rubbing is kept to a minimum
#12
09-18-2007, 03:27 PM
Former Vendor
#14
09-19-2007, 01:15 AM
but I don't think I'm as low as you
Thread
Thread Starter
Forum
Replies
Last Post
Chibi2
MINI Parts for Sale
4
05-19-2016 03:46 PM
Amberleigh MacIntyre
R55 :: Clubman Talk (2008+)
10
11-11-2015 11:59 AM
vbmike
MINI Parts for Sale
7
10-15-2015 04:32 AM