Big brake kits and wheels... updated list
#1
Big brake kits and wheels... updated list
So I was searching through nam about BBK fitment and couldn't find a thread that where people have shared what bbk's they have and which wheels they have found that Fit.
So please post up your configurations and I will update the list here. Vendor help is appreciated. If you have a spread sheet of this info you can email it to erikbruner [at] gmail [dot] com . I will parse the info and post it here.
-AP Racing: AP Racing Template
-Brembo:
-Detroit Tuned BBK:
-Ireland Engineering BBK:
-JCW R53 Upgrade/R56 Stock Brakes:
-StopTech BBK: StopTech Template
-Texas Speed Works BBK: TSW BBK Template
-Wilwood: (This kit has many different variations and options (that's a good thing) so please contact a vendor)
>11.5 (TCE/Wilwood Plus 1)
>13 (TCE/Wilwood Plus 3)
>13.1 (TCE/Wilwood Plus 4)
>14 (TCE/Wilwood Plus 5)
... I will be looking to maintain this thread, it would be great to have people helping.
Disclaimer: I accept no responsibility for the items on this list. You must do your research when purchasing wheels for your bbk, and always be ready for spacers/issues. This is simple a reference list of what other people have been running. By purchasing wheels and brakes blindly off this list you are in essence taking some ones word for it. Good Luck.
So please post up your configurations and I will update the list here. Vendor help is appreciated. If you have a spread sheet of this info you can email it to erikbruner [at] gmail [dot] com . I will parse the info and post it here.
-AP Racing: AP Racing Template
-Brembo:
- 17"
Kyowa Racing KR 210 17 X 7.5 et 42 needs 5 mm spacer
- 18"
Tenzo Mach 10's 18 X 7.5 et 42 no spacer
-Detroit Tuned BBK:
- 17"
R90 OEM - Close fitment 1-2mm of room, Spacer Suggested (Yukka Patrol)
-Ireland Engineering BBK:
-JCW R53 Upgrade/R56 Stock Brakes:
- 16"
16x7 ET42 Volk TE37 no spacer
- 17"
OEM R90 17"
OEM R91 17"
BBS LM in 17x7.5
Prodrive P1 17x7ET42
Enkei MM2 17x7ET42
BBS RV-F 17x7.5ET42
all OEM 17" wheels
OEM R91 17"
BBS LM in 17x7.5
Prodrive P1 17x7ET42
Enkei MM2 17x7ET42
BBS RV-F 17x7.5ET42
all OEM 17" wheels
- 18"
Motegi Touge 18x7.5 ET45
-StopTech BBK: StopTech Template
- 17"
OZ Ultraleggeras 17x7 et37 - 3mm spacer needed (minimusprime 5mm spacer)
OZ Superleggera 17"x7" ---- +37mm offset -- 5mm spacer
BBS RV-F 17"x7.5" -- +42mm offset -- no spacer
SSR GT7 17"x7.5" -- +42mm offset -- no spacer
SSR Comp 17"x7.5" -- +42mm offset -- 3mm spacer
Team Dynamics Pro Race 1 17"x7" --- +45mm offset -- no spacer
SSR GT7s 18 x 7.5" +42mm offset - no spacers
SSR type C RS 17x7.5 et42 8mm spacer (to clear strut+brakes)
OZ Superleggera 17"x7" ---- +37mm offset -- 5mm spacer
BBS RV-F 17"x7.5" -- +42mm offset -- no spacer
SSR GT7 17"x7.5" -- +42mm offset -- no spacer
SSR Comp 17"x7.5" -- +42mm offset -- 3mm spacer
Team Dynamics Pro Race 1 17"x7" --- +45mm offset -- no spacer
SSR GT7s 18 x 7.5" +42mm offset - no spacers
SSR type C RS 17x7.5 et42 8mm spacer (to clear strut+brakes)
-Texas Speed Works BBK: TSW BBK Template
- 15"
15" Team Dynamics Pro Race 1.2 no spacer
15" Team Dynamics Pro Race 1 +38
15" Team Dynamics Pro Race 1 +38
- 16"
16" Team Dynamics Pro Race 1.2 no spacer
16" OZ Ultraleggera
16x7 Rota Slipstreams in +40
NZO 16x7 Speedy Star (Kosei K1 knockoff)
16x7 Rota Slipstream (+45 Does Not Fit, +40 Fits Fine)
16" OZ Ultraleggera
16x7 Rota Slipstreams in +40
NZO 16x7 Speedy Star (Kosei K1 knockoff)
16x7 Rota Slipstream (+45 Does Not Fit, +40 Fits Fine)
- 17"
17" Team Dynamics Pro Race 1.2 +42 no spacer
17" OZ Ultraleggera
17" "Most" BBS (TSW)
17" OEM R90
BS RC 17x7, +42 worked great
BBS RV-F 17x7.5, +42 works great
17" OZ Ultraleggera
17" "Most" BBS (TSW)
17" OEM R90
BS RC 17x7, +42 worked great
BBS RV-F 17x7.5, +42 works great
-Wilwood: (This kit has many different variations and options (that's a good thing) so please contact a vendor)
>11.5 (TCE/Wilwood Plus 1)
- 17"
17" webspokes require a 5mm spacer (agranger)
>12.2 (TCE/Wilwood Plus 2)- 16"
Rota Slipstream +40 16" No Spacer
Rota Circuit 8 +40 16" No Spacer
BSA 303 16x7 40mm offset 3mm spacer needed
Rota Circuit 8 +40 16" No Spacer
BSA 303 16x7 40mm offset 3mm spacer needed
- 17"
BBS LM 17" No Spacer
Fikse Mach V +37 17" No Spacer
Team Dynamics 1.2 17" No Spacer
Minilite "B" 17" No Spacer
OZ Superturismo WRC 7x17 +40 no spacer
Rota Subzero 17x7.5 45mm offset = fine
S-Lites 7mm spacer needed at least
Fikse Mach V +37 17" No Spacer
Team Dynamics 1.2 17" No Spacer
Minilite "B" 17" No Spacer
OZ Superturismo WRC 7x17 +40 no spacer
Rota Subzero 17x7.5 45mm offset = fine
S-Lites 7mm spacer needed at least
>13 (TCE/Wilwood Plus 3)
- 17"
R90 2.5mm spacer with longer bolts/studs
>13.1 (TCE/Wilwood Plus 4)
>14 (TCE/Wilwood Plus 5)
- 18"
18X7 OZ Ultralegerra et 42 (no spacer)
... I will be looking to maintain this thread, it would be great to have people helping.
Disclaimer: I accept no responsibility for the items on this list. You must do your research when purchasing wheels for your bbk, and always be ready for spacers/issues. This is simple a reference list of what other people have been running. By purchasing wheels and brakes blindly off this list you are in essence taking some ones word for it. Good Luck.
Last edited by minimusprime; 11-05-2007 at 05:33 AM.
#5
just found this post
https://www.northamericanmotoring.co...=big+brake+kit
i'm pulling a lot of info from it. I am going to try and consolodate as much of this info as i can. Todd@tce states in that thread that this is a daunting and difficult task... I agree. At the very least if we get people posting the setups that they have run with which wheels it's a start.
As any one with a bbk knows... wheel shopping is a stressful and obnoxious process.
https://www.northamericanmotoring.co...=big+brake+kit
i'm pulling a lot of info from it. I am going to try and consolodate as much of this info as i can. Todd@tce states in that thread that this is a daunting and difficult task... I agree. At the very least if we get people posting the setups that they have run with which wheels it's a start.
As any one with a bbk knows... wheel shopping is a stressful and obnoxious process.
#7
6th Gear
iTrader: (6)
Join Date: Jan 2007
Location: Ohio
Posts: 3,952
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Thanks for the data nate. Yeah I had planned on formatting and organizing once I get enough data to actually be meaning full.
#11
I'll have to defer to many 13" customers and what they are running for the aftermarket parts, but...the TCE/Wilwood 13" (now called Plus 3) clears the 17" R90 with an optional 2.5mm spacer. And longer bolts/studs.
The Plus 4 will require far more room, similar to that of the Stoptech kit.
The Plus 5 will require 18" wheels but remains more wheel friendly than 4.
The Plus 4 will require far more room, similar to that of the Stoptech kit.
The Plus 5 will require 18" wheels but remains more wheel friendly than 4.
#13
I'll have to defer to many 13" customers and what they are running for the aftermarket parts, but...the TCE/Wilwood 13" (now called Plus 3) clears the 17" R90 with an optional 2.5mm spacer. And longer bolts/studs.
The Plus 4 will require far more room, similar to that of the Stoptech kit.
The Plus 5 will require 18" wheels but remains more wheel friendly than 4.
The Plus 4 will require far more room, similar to that of the Stoptech kit.
The Plus 5 will require 18" wheels but remains more wheel friendly than 4.
/cough... what about the rest of the bazillion wheels you've tried... lazy ****.
#14
#16
#17
#18
#19
#20
keep in mind it's rare for any aftermarket 17" to have a high offset like OEM since we're basically stealing Honda fitments anyhow. If any OEM 17" works, most all aftermarket wheels will work on the JCW kit. I wouldn't dare say that about anything else like Wilwood, Brembo, Stoptech or AP Racing.
#21
Right on. I noted the oem's. What is bringing this on is I was just shopping for some new wheels, just because. It's a real downer because I always see something that I would love to have for cheap... but the reality is I have no idea if it will fit over my brakes... chances are it won't.
Frustrating. After collecting all this stuff I may switch it up.
Frustrating. After collecting all this stuff I may switch it up.
#22
#24
Here's the link to out fitment template - check the scale when you print it and tape it to something stiff (e.g. cardboard or the like):
http://www.txwerks.com/images/Instal...ILHOUETTE1.pdf
Some of the aftermarket wheels tested were OZ Ultraleggera (16 and 17's fit fine, +37), Team Dynamics Pro Race 1's (15 w/ +38 and 17's with +42 work fine, all 17" are fine), NZO 16x7 Speedy Star (looks like a knockoff of the Kosei K1, fits fine), BS RC (17x7, +42 worked great), Rota Slipstream (16x7 with +45 does NOT provide enough clearance, +40 works fine), BBS RV-F (17x7.5, +42 works great). Of all the aftermarket wheels tested, only the 16x7 Rota Slipstream with the +45 didn't pass. Most track-friendly wheels clear just fine, give a +42 or greater offset and curved spokes for clearance.
http://www.txwerks.com/images/Instal...ILHOUETTE1.pdf
Some of the aftermarket wheels tested were OZ Ultraleggera (16 and 17's fit fine, +37), Team Dynamics Pro Race 1's (15 w/ +38 and 17's with +42 work fine, all 17" are fine), NZO 16x7 Speedy Star (looks like a knockoff of the Kosei K1, fits fine), BS RC (17x7, +42 worked great), Rota Slipstream (16x7 with +45 does NOT provide enough clearance, +40 works fine), BBS RV-F (17x7.5, +42 works great). Of all the aftermarket wheels tested, only the 16x7 Rota Slipstream with the +45 didn't pass. Most track-friendly wheels clear just fine, give a +42 or greater offset and curved spokes for clearance.