When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
im waiting on team dynamics to come out with their direct TPMS compatible rims. i wanted the pro race 1's but only the pro race 1.2's are being modified.
im waiting on team dynamics to come out with their direct TPMS compatible rims. i wanted the pro race 1's but only the pro race 1.2's are being modified.
Did something change on the 07's? I'm running the 1.2's without any problems with the TPMS.
Ummm... arent those stoptech rotors on the wrong side of the car? Shouldn't the grooves be going the other direction? Nice wheels btw.
That's the kinda humour I like , you would have got me too, if it was not for the fact that stoptec label's everything really well and even gives you pictures to follow.
I wouldn't know. I've just seen that Wilwoods, Porsche, etc. all have the grooves going the other direction. If that's the way stoptech does it, wierd. It doesn't make any sense to me.
Did something change on the 07's? I'm running the 1.2's without any problems with the TPMS.
the later build, mines a week 40, MINIs have direct TPMS which have a sensor on the inside and require rims with special mounting points or something... from what i understand, its just a slight flat spot to allow the sensor to be attached to the inside of the rim.
I wouldn't know. I've just seen that Wilwoods, Porsche, etc. all have the grooves going the other direction. If that's the way stoptech does it, wierd. It doesn't make any sense to me.
the later build, mines a week 40, MINIs have direct TPMS which have a sensor on the inside and require rims with special mounting points or something... from what i understand, its just a slight flat spot to allow the sensor to be attached to the inside of the rim.
I give. It doesn't make sense to me because the gasses should be "swept away" using centrifugal force. danielo is right. I found a picture earlier showing the exact direction of the vents in the rotors but I can't find it now. The slots are there for a reason.