Cragar S/S FWD Wheels
#1
Cragar S/S FWD Wheels
After attending a car show with a lot of classic muscle cars, I got an itch for a set of Cragar's for my MCS'07. Has anyone used these on their MINI? If so can you please post a picture. I found one site where you can see these virtually on the car, but I hoping to find a picture or two of the real thing. Thanks.
#2
#3
These appear to come available with the right bolt pattern and offset.
http://www.cragarwheel.com/wheels/?i...rst=18&fid=all
http://www.jegs.com/p/Cragar/Cragar-...92828/10002/-1
http://www.jegs.com/i/Cragar/260/600...ductId=1192828
http://www.cragarwheel.com/wheels/?i...rst=18&fid=all
http://www.jegs.com/p/Cragar/Cragar-...92828/10002/-1
http://www.jegs.com/i/Cragar/260/600...ductId=1192828
#4
These appear to come available with the right bolt pattern and offset.
http://www.cragarwheel.com/wheels/?i...rst=18&fid=all
http://www.jegs.com/p/Cragar/Cragar-...92828/10002/-1
http://www.jegs.com/i/Cragar/260/600...ductId=1192828
http://www.cragarwheel.com/wheels/?i...rst=18&fid=all
http://www.jegs.com/p/Cragar/Cragar-...92828/10002/-1
http://www.jegs.com/i/Cragar/260/600...ductId=1192828
#6
Man, those Gragars are nice.
BUT, not a 16"er in the bunch!!
My last muscle car, '66 Chevelle, I had SS 14 narrows/standards on the front and SS 15" deep dish on the back.
In '85 I scored one of the sets of anniversary center caps which included this belt buckle. Still have the set as well as the belt buckle. Also have a set of '68 spinners I bought in '69 before I shipped out. Both sets were never mounted on wheels. However, they are mounted on oak display plaques that I made.
BUT, not a 16"er in the bunch!!
My last muscle car, '66 Chevelle, I had SS 14 narrows/standards on the front and SS 15" deep dish on the back.
In '85 I scored one of the sets of anniversary center caps which included this belt buckle. Still have the set as well as the belt buckle. Also have a set of '68 spinners I bought in '69 before I shipped out. Both sets were never mounted on wheels. However, they are mounted on oak display plaques that I made.
#7
Trending Topics
#8
Moreorless, based on the following link they are available in 16".
http://www.jegs.com/p/Cragar/Cragar-...0002/-1#bottom
Slinger688, regarding the wight all I could find was the shipping weight which is 25 pounds.
http://www.jegs.com/p/Cragar/Cragar-...0002/-1#bottom
Slinger688, regarding the wight all I could find was the shipping weight which is 25 pounds.
Last edited by jgaset; 06-21-2010 at 10:30 AM.
Thread
Thread Starter
Forum
Replies
Last Post
SosoMINI
MINI Parts for Sale
30
11-22-2015 03:17 PM