Anyone running the NM Eng. RSe12 18" LW Wheels?
#1
Anyone running the NM Eng. RSe12 18" LW Wheels?
They look great, I'm just afraid they may be too big. The specs look great, the weight is on point. I'm currently on the 17" JCW R112 Style Wheels from A-Spec with Hankook V12 Evos. Nothing wrong with them but I was looking to maybe put track tires on the R112s and maybe use the RSe12s for the street.
I'd love to get some feedback on these from someone.
Weighing just a mere 18.8 lbs, The RSe12 wheels will enhance your motoring experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.
Size: 18x7.5
Offset: +45 mm
PCD: 4-100mm
Bore: 56.1mm
Lug Opening: 14mm Conical Seat
RSe12 is OEM TPMS (Tire Pressure Monitoring System) compatible.
RSe12 utilizes OEM Mini or JCW center cap as well as mounting lug bolts, which are not included with the wheel.
I'd love to get some feedback on these from someone.
Weighing just a mere 18.8 lbs, The RSe12 wheels will enhance your motoring experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.
Size: 18x7.5
Offset: +45 mm
PCD: 4-100mm
Bore: 56.1mm
Lug Opening: 14mm Conical Seat
RSe12 is OEM TPMS (Tire Pressure Monitoring System) compatible.
RSe12 utilizes OEM Mini or JCW center cap as well as mounting lug bolts, which are not included with the wheel.
#4
#6
#7
Trending Topics
#10
I have them in Matte Black. Here are a few shots for your drooling enjoyment.
As you can see, they don't always show up in photographs all that well. They also almost require you to lower the car, so here they are after putting on the NM Engineering RSa Springs too.
One more picture of my car on NM Engineering's website.
http://www.flickr.com/photos/devinelston/8092739541/
http://www.flickr.com/photos/devinelston/8092738799/
http://www.flickr.com/photos/devinelston/8092744190/
http://www.flickr.com/photos/devinelston/8092743300/
http://www.flickr.com/photos/devinelston/8092738451/
http://www.flickr.com/photos/devinelston/8092744446/
http://www.flickr.com/photos/devinelston/8092739839/
http://www.flickr.com/photos/devinelston/8092746106/
http://www.flickr.com/photos/devinelston/8092738799/
http://www.flickr.com/photos/devinelston/8092744190/
http://www.flickr.com/photos/devinelston/8092743300/
http://www.flickr.com/photos/devinelston/8092738451/
http://www.flickr.com/photos/devinelston/8092744446/
http://www.flickr.com/photos/devinelston/8092739839/
http://www.flickr.com/photos/devinelston/8092746106/
As you can see, they don't always show up in photographs all that well. They also almost require you to lower the car, so here they are after putting on the NM Engineering RSa Springs too.
http://www.flickr.com/photos/devinelston/8187619512/
http://www.flickr.com/photos/devinelston/8186624981/
http://www.flickr.com/photos/devinelston/8186624981/
One more picture of my car on NM Engineering's website.
#11
#12
I have them in Matte Black. Here are a few shots for your drooling enjoyment.
As you can see, they don't always show up in photographs all that well. They also almost require you to lower the car, so here they are after putting on the NM Engineering RSa Springs too.
One more picture of my car on NM Engineering's website.
As you can see, they don't always show up in photographs all that well. They also almost require you to lower the car, so here they are after putting on the NM Engineering RSa Springs too.
One more picture of my car on NM Engineering's website.
Nice!!! What size tires are you ridding on?
#15
Thanks! (BTW your pics helped me solidify my purchases when you first posted yours).
I don't want to stray too far from the original thread, but the ride is a tad rougher than I'd like after lowering it. I'll probably end up getting some Konis as replacement for the Sport Struts I have now to get some control. I haven't aligned it yet, but it's pretty even so far. As for cost, I didn't pay a thing for the install... because I did it myself. Took an afternoon/evening, and would be so much quicker the next time around.
I don't want to stray too far from the original thread, but the ride is a tad rougher than I'd like after lowering it. I'll probably end up getting some Konis as replacement for the Sport Struts I have now to get some control. I haven't aligned it yet, but it's pretty even so far. As for cost, I didn't pay a thing for the install... because I did it myself. Took an afternoon/evening, and would be so much quicker the next time around.
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
07-16-2020 01:54 PM
ltjpunk7
MINI Parts for Sale
2
09-06-2015 08:32 AM
Powershift
MINIs & Minis for Sale
1
08-16-2015 06:14 PM
Rennfahrer555
R50/R53 :: Hatch Talk (2002-2006)
10
08-13-2015 10:07 AM