Official F56 Wheel Fitment Thread
#53
#60
is there a conclusion on the max tire width for the F56?
#61
I don't know but I'd guess comparable to the current pricing on their site.
http://www.nm-eng.com/home.aspx
http://www.nm-eng.com/home.aspx
#62
I think its gonna depend on offset of the wheels. There is plenty of clearance for them to come out. I think with a 7.5 wheel at 45 offset you can run MAYBE up to a 215, but if you were to add some 5-10mm spacers you would definately be in the clear on both ends.
#63
#64
What suspension setup do you have? Adjustable Dampers or sport?
#68
Join Date: Jan 2008
Location: Lake District, ENGLAND
Posts: 596
Likes: 0
Received 4 Likes
on
4 Posts
F56 MINI on Speedline Marmora by jamesnathanjolly, on Flickr
Colour Coded by jamesnathanjolly, on Flickr
Colour Coded Front End by jamesnathanjolly, on Flickr
Colour Coded by jamesnathanjolly, on Flickr
Colour Coded Front End by jamesnathanjolly, on Flickr
The following users liked this post:
Spyderidol (06-14-2019)
#72
#73
Join Date: Jan 2008
Location: Lake District, ENGLAND
Posts: 596
Likes: 0
Received 4 Likes
on
4 Posts
M14 x 1.25 - you will be able to use the OEM bolts (cone seat) on pretty much most aftermarket rims, its just that I chose a set which use radius seat! I didn't know that the wheels would need radius bolts until they arrived though!!!!
TPMS were just unbolted and bolted into the new rims, no issues.
TPMS were just unbolted and bolted into the new rims, no issues.
#74
Regarding TPMS, it appears TireRack has still some challenges in this regard.
The Asiento wheels and tires I sourced from them came with TPMS which the car could not recognize. They cheerfully agreed to RA that set of sensors, and shipped me a different part to try.
I tried them.
0 for 2....
Ultimately we'll get it sorted I am sure.
The Asiento wheels and tires I sourced from them came with TPMS which the car could not recognize. They cheerfully agreed to RA that set of sensors, and shipped me a different part to try.
I tried them.
0 for 2....
Ultimately we'll get it sorted I am sure.
#75