OZ Ultraleggera specs for Gen 1
#1
OZ Ultraleggera specs for Gen 1
So I looked for the answer on internet, but could not come up with one. I have a set of OZ Ultraleggera wheels in 17" for Gen 1 (2002 MCS). From what I found, my MCS has a center bore of 56.1 What I cannot find, is what is the bore on the wheels? I could measure it, but I am afraid i might be a little off (maybe around 66). Anyone has an idea? I need to get some hub centric rings to fit the wheels. Any help would be appreciated.
#2
see
https://www.northamericanmotoring.co...oz-wheels.html
and
http://www.fiestastforum.com/forum/t...bcentric-rings
They don't agree so best to contact Alex@tirerack.com
https://www.northamericanmotoring.co...oz-wheels.html
and
http://www.fiestastforum.com/forum/t...bcentric-rings
They don't agree so best to contact Alex@tirerack.com
#3
thanks minihune, I saw that Fiesta forum before, and I confident that the bore on OZ is not 74mm like it says. I will try to contact Alex (he might be still there, the post is from 2006) but I also found some aluminum rings that are 66.1 and 66.7 (which seems about the right size) so might give that a shot
#5