Rotiform BLQs
#1
Rotiform BLQs
Newbie here. I have a 2013 R56S and am in the market to purchase a set of 17x8 Rotiform BLQs. I see you can have them custom made in that size and bolt pattern on their website, but in order to purchase you must find a dealer. I have called a few and they act as if these do not exist. Yet I have seen plenty of folks running that wheel in that size and bolt pattern. Can anyone point me in the right direction of a parts website that I can obtain these from? Thank you in advance for your help.
#2
I believe that ECS tuning can order anything that Roti has. BLQ's only come in +ET30 max with the 4x100 PCD.
Would be similar to running an 18mm spacer on a stock wheel with the +30 of the Rotiform BLQ.
IE. the wheel face of the BLQ/4x100/+30 would be moved about 3/4" outward from where a stock wheel sits.
I am assuming, at the 17" size, you are talking about the $300/wheel 'cast' BLQ's and not the $1300/wheel Forged-Monoblock-BLQ's or 3-piece-forged-BLQ's (which you can get fully custom spec'd.)
.
.
.
Would be similar to running an 18mm spacer on a stock wheel with the +30 of the Rotiform BLQ.
IE. the wheel face of the BLQ/4x100/+30 would be moved about 3/4" outward from where a stock wheel sits.
I am assuming, at the 17" size, you are talking about the $300/wheel 'cast' BLQ's and not the $1300/wheel Forged-Monoblock-BLQ's or 3-piece-forged-BLQ's (which you can get fully custom spec'd.)
.
.
.
Thread
Thread Starter
Forum
Replies
Last Post