Tires, Wheels, & Brakes Discussion about wheels, tires, and brakes for the new MINI.

Torque Steer - How do I minimize it?.

Thread Tools
 
Search this Thread
 
  #1  
Old 04-08-2005, 11:39 AM
Jeru's Avatar
Jeru
Jeru is offline
2nd Gear
Thread Starter
Join Date: May 2004
Location: Florida
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Torque Steer - How do I minimize it?.

I have 18's, and I guess because they are super light, and the diameter is now taller, the car wants to pull to the left and right a bit.. when I punch the throttle. Will lowering the car help this?
 
  #2  
Old 04-08-2005, 11:59 AM
npartist's Avatar
npartist
npartist is offline
4th Gear
Join Date: Aug 2002
Location: Farmington Hills, MI
Posts: 352
Likes: 0
Received 1 Like on 1 Post
uh, wheels don't cause torque steer. The only way you are going to minimize torque steer is to get a rwd car. When you say left and right a bit that means it isn't torque steer cause torque steer is directional (i think right..) and only under accel. And MINI's don't really have torque steer (do to equal length drive shafts) unless one wheel is slipping. And 18inches technically shouldn't change the overall tire diameter (unless you get the wrong size tire). Sounds like you either got wider tires which follow road imperfections/grade more or your alignment is off.
 
  #3  
Old 04-08-2005, 12:08 PM
JeffS's Avatar
JeffS
JeffS is offline
5th Gear
Join Date: Feb 2005
Location: Raleigh, NC
Posts: 928
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Jeru
Will lowering the car help this?
No.

Most likely what you're experiencing is due to the tires - and it's not torque steer. Some tires just like following grooves in the road more than others.
 
  #4  
Old 04-08-2005, 12:48 PM
Zociac's Avatar
Zociac
Zociac is offline
3rd Gear
Join Date: Apr 2004
Location: Oregon
Posts: 169
Likes: 0
Received 1 Like on 1 Post
What Cause Torque Steering

The new Mini has equal length drive shafts so it virtually eliminates torque steering on a flat surface when you accelerate in a straight line. You will experience torque steering however when accelerate on an uneven or slope surface due to dynamic contact patch change.

Here is a good article on what causes torque steeling.

http://www.sportcompactcarweb.com/ed..._technobabble/
 
  #5  
Old 04-08-2005, 03:37 PM
minihune's Avatar
minihune
minihune is offline
OVERDRIVE - Racing Champion
Join Date: Feb 2003
Location: Mililani, Hawaii
Posts: 15,260
Received 69 Likes on 66 Posts
With my Quaife I do get some added torque steer.
I minimize it with a smoother even throttle application.
Make sure your tire pressure is even and in the right range.
Tires and road surface are also factors.

Even though the MINI is supposed to have minimal torque steer I think there is still a little. Once you add an upgraded pulley for more power and the Quaife you can feel it even more if you are not careful. Just hold on tight when you steer
 
  #6  
Old 04-08-2005, 08:05 PM
911Fan's Avatar
911Fan
911Fan is offline
6th Gear
Join Date: May 2003
Posts: 1,118
Likes: 0
Received 1 Like on 1 Post
BMW has miraculously gotten rid of torque steer by the ingenious use of equal length drive shafts.

Yeah, right.

While torque steer might technically have been eliminated, there are enough other FWD artifacts which make hard acceleration a handful in anything other than ideal conditions. That "torque steer" has been banished is really meaningless, IMO.

The other post is correct. The only way to truly get rid of unintended wandering during hard acceleration is to get a rear wheel drive car.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Supertractor3
Stock Problems/Issues
4
04-07-2017 11:16 AM
debitsandcredits
R56 :: Hatch Talk (2007+)
14
09-21-2015 08:34 AM
bobbi.steines
R56 :: Hatch Talk (2007+)
3
09-10-2015 11:31 AM
Mini Mania
Drivetrain Products
0
09-04-2015 09:23 AM



Quick Reply: Torque Steer - How do I minimize it?.



All times are GMT -7. The time now is 09:21 AM.