17" BBS RG-R centering ring question
#2
You can probably re-use the stock lugs, just make sure the tapering in the
wheel lug holes are the same as your lugs.
If the wheel sits on the center hub properly without any looseness
(you can tell right off the bat),
then the wheels are already hub-centric. I believe Alex sells RG-R's
over at the tirerack so you might be able to get a set from him if
needed. :smile:
wheel lug holes are the same as your lugs.
If the wheel sits on the center hub properly without any looseness
(you can tell right off the bat),
then the wheels are already hub-centric. I believe Alex sells RG-R's
over at the tirerack so you might be able to get a set from him if
needed. :smile:
#7
The rings are there so the wheel fit hub centric. The hub is what centers and locates the wheel not the lug bolts. The centering rings allow the wheel manufacturer to make a wheel that can be used in other applications. The RGR wheels are same fitment for some Hondas. I would get a set of correct ring. I had my wheels for ~ 2 years, BBS may have change the wheels and do not require the rings. I would check with BBS.
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post
Mini'mon
MINI Parts for Sale
2
08-16-2015 04:15 PM
ECSTuning
Vendor Announcements
0
08-12-2015 01:24 PM
ECSTuning
Vendor Classifieds
0
08-07-2015 05:55 AM