18x8 Wheels on MCS
#26
#30
6th Gear
iTrader: (1)
not bad at all pretty standard when it comes to 2 or 3-pc wheels in weight. is that D' graphite finish? what R' U' getting next or if U dont want 2say it's kool. these R' custom- so no need 4hub rings right? i'll call U' about ur' other kit 4sell just whant 2make sure it's all good 4what i'm doin'
Originally Posted by 2perCooper
the wheels are 2pc and weigh about 22lbs a piece.
#32
#33
#35
Originally Posted by 02///MCS
Hey all. I was wondering if there was anyone with 18x8 wheels on an MCS. I'm looking into the AXIS Supermesh which come in 18x8. I also want to drop my car at the same time, would like the m7 springs with the 1.3"
drop but will do the h-sports (~1" drop) if it means no rubbing. What do you think. Will 18x8 rub of dropped? I personally don't think I'll have a problem but was wondering what you all think. Thanks.
drop but will do the h-sports (~1" drop) if it means no rubbing. What do you think. Will 18x8 rub of dropped? I personally don't think I'll have a problem but was wondering what you all think. Thanks.
Now these pics are not lowered yet, I just haven't had a chance to take more photos recently.
#36
Join Date: Jul 2005
Location: Miami, FL
Posts: 2,744
Likes: 0
Received 0 Likes
on
0 Posts
The wheels are not the se7en mods. They are the Supermesh, they are not listed on the Axis website any more because they were replaced with the Axis Penta. I'd get the Penta but the smallest size they come in is 19". Which for my taste is a bit much as I don't want to sacrifice too much performance. If someone could photoshop the Supermesh onto an MCS I would greatly appreciate it. Thanks.
These are the Axis Supermesh:
These are the Axis Supermesh on an Audi A4:
These are the Axis Supermesh on a 330Ci Performance Package (ACS Lip):
These are the Axis Penta:
These are the Axis Supermesh:
These are the Axis Supermesh on an Audi A4:
These are the Axis Supermesh on a 330Ci Performance Package (ACS Lip):
These are the Axis Penta:
#38
#39
6th Gear
iTrader: (1)
borbet's r' tight!!!
D' flat caps dont take away from them.
how close 2' rear fenders R' U'?
look's killer,
how close 2' rear fenders R' U'?
look's killer,
Originally Posted by Dj_Konky
This is my P-chop of my car, probably the setup I'm gonna run next spring. They're only 17", but 7.5" front, 9" rear.
If you're familiar with these wheels, which are borbet type A's, I'm gonna go with flat caps instead of the ones in the picture.
If you're familiar with these wheels, which are borbet type A's, I'm gonna go with flat caps instead of the ones in the picture.
#40
6th Gear
iTrader: (1)
axxis
hmm...i was wonderin' why i did not see them anymore (se7en mod's) but that mesh wheel look's better.......
Originally Posted by 02///MCS
The wheels are not the se7en mods. They are the Supermesh, they are not listed on the Axis website any more because they were replaced with the Axis Penta. I'd get the Penta but the smallest size they come in is 19". Which for my taste is a bit much as I don't want to sacrifice too much performance. If someone could photoshop the Supermesh onto an MCS I would greatly appreciate it. Thanks.
These are the Axis Supermesh:
These are the Axis Supermesh on an Audi A4:
These are the Axis Supermesh on a 330Ci Performance Package (ACS Lip):
These are the Axis Penta:
These are the Axis Supermesh:
These are the Axis Supermesh on an Audi A4:
These are the Axis Supermesh on a 330Ci Performance Package (ACS Lip):
These are the Axis Penta:
Thread
Thread Starter
Forum
Replies
Last Post
eatsleepautox
MINIs & Minis for Sale
6
10-30-2015 06:46 AM
col127
F55/F56 :: Hatch Talk (2014+)
4
08-21-2015 02:11 PM
dyeLucky
MINI Parts for Sale
3
08-07-2015 07:10 AM