S-lites, same car 2 different castings?
#1
#2
#3
#5
#7
Originally Posted by kenchan
hummm... make me wonder again what the official offset for the s-lites are.
in the past i thought i read they were +50mm.... a few days ago a member told me his
s-lites are stamped +48mm..
in the past i thought i read they were +50mm.... a few days ago a member told me his
s-lites are stamped +48mm..
Trending Topics
#8
#9
HUGE file of the pics I posted earlier. If you look them over you can make out IS48 on the first pic on the top spoke:
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg
And IS48 upside down on the lower left spoke in this picture:
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg
So it would seem +48 for both...but still different casts. One clearly says Hungary, but I cant make out anything on the other.
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg
And IS48 upside down on the lower left spoke in this picture:
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg
So it would seem +48 for both...but still different casts. One clearly says Hungary, but I cant make out anything on the other.
#12
Yes, please CROP down the photos to make this thread operational.
My MCS is a February, 2006 build.
All four of my S-Lites have the additional support rib. They say, "Made in Czech. Republic" and have the "Ronal" logo on the outside where the tire mounts. 48mm.
My MCS is a February, 2006 build.
All four of my S-Lites have the additional support rib. They say, "Made in Czech. Republic" and have the "Ronal" logo on the outside where the tire mounts. 48mm.
Last edited by TSR53; 01-02-2019 at 06:50 AM.
#14
Thread
Thread Starter
Forum
Replies
Last Post
truedrew
R60/R61 Stock Problems/Issues
4
08-10-2015 10:39 AM