FS:: MINI Challenge Exhaust Is Back! Virtual Car Show is Back!
#1
MINI Challenge Exhaust Is Back! Virtual Car Show is Back!
ECS Tuning
Scorpion Exhaust
From England, Scorpion stainless steel performance exhaust systems have been sought after by tuners the world over. Now these free-flow, stainless steel systems are available in the U.S. from ECS Tuning! They have been engineered to deliver a horsepower boost yet sound better then other free-flow systems. And they're built to last using the best 304 stainless steel. Part of the MINI Challenge for years and continues!
Sound clip:
Facebook Post
"Click HERE for the R56-R59 Cooper S/JCW MINI Challenge Exhaust"
"Click HERE for the MINI Cooper Scorpion Exhaust"
---------------------------------------------------------------------------------------------------------------------------------------
ECS Tuning
ECS VIRTUAL CAR SHOW 2020
With our favorite shows mostly canceled and many of us restricted to our houses for the foreseeable future, we've decided to bring a car show to your computer with a little help from some of our friends. You may have seen our previous Virtual Car Shows in the past, but this one is going to be a little different. This year, we are asking for you to submit your car once again. After submissions end on Friday the 12th of June, we will narrow down the list of entries to our final contenders. Then, Wednesday the 17th, our celebrity guest judges will pick the top twenty cars to compete for 'best in class' for Audi, BMW, Volkswagen, and the special 'wild card' category which you can enter your MINI Cooper! Once they've been selected, you, the Virtual Car Show attendees, will begin the voting on Friday the 19th to determine the best cars in each class. So grab your detailing equipment, your favorite picture-taking device, and upload your car to the ECS Virtual Car Show 2020: Quarantine Edition and see if your build has what it takes to impress the community and our celebrity judges.
Click the link below to enter!
"Click HERE for Virtual Car Show"
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#3
Sorry just saw your message. No drone in either, scorpion tends to be louder in sound.
BTW , we just got the R56-R58 S/JCW MINI Challenge ecat back back in stock!
https://www.ecstuning.com/b-scorpion...d/smns016~sci/
BTW , we just got the R56-R58 S/JCW MINI Challenge ecat back back in stock!
https://www.ecstuning.com/b-scorpion...d/smns016~sci/
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#5
Its loud, but not straight pipe loud. Safe for the streets unless under full pull.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#7
Trending Topics
#10
Its loud , but not straight pipe loud. I have it with stock Cat and sounds good, with Decat it will take it up a notch. Wake the neighbors at that point.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#12
I dont know how long they will last in stock, some are going out the door already, then its another month to 2 months till new stock comes
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#13
Fingers crossed that the "Why I Hate ECS Tuning" facebook group isn't going to be laughing at me
#14
The following users liked this post:
scotty_r56s (03-20-2021)
#15
#18
Warehouse is backed up a little due to huge demand from the stimulus checks. Hold tight. We have them in stock.
Just ran back and its already at the pack table to ship.
Just ran back and its already at the pack table to ship.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; 03-22-2021 at 10:55 AM.
#21
@ECSTuning you guys really came through on this. I absolutely love it. This is actually quieter (and my God, so much more refined) than the straight pipe I had before. No more worrying about being black-flagged . I can't thank you enough for working with Scorpion to make this available in the US.
Now I have to take back all of those mean things I said about y'all
Now I have to take back all of those mean things I said about y'all
The following users liked this post:
ECSTuning (03-24-2021)
#22
We appreciate it. I am glad to work with Scorpion on this and we are working with them on the newest F56 Challenge exhaust and parts we just added to the ECS site, those guys will like those also.
Mine got a bit louder with more miles on it as the rear muffler part sound packing material starts to settle in it seems like. Maybe it was my ears
Glad to help. You made my day.
Mine got a bit louder with more miles on it as the rear muffler part sound packing material starts to settle in it seems like. Maybe it was my ears
Glad to help. You made my day.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
The following users liked this post:
scotty_r56s (03-24-2021)
#23
Just an update mine has been doing well and put some miles on it. Still sounds good and even hit part of a deer carcass on the road ( unavoidable as traffic was behind me and beside me) and it held up. It hit my GP2 skid plate (which did a lot to save the engine bay) and then hit the one clamp and the back box section, exhaust it ok and i was able to hose and clean off the residue with soap and a long brush.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
ECSTuning
Interior/Exterior Products
1
03-18-2021 08:51 AM
ECSTuning
Apparel, Collectibles and More
0
05-22-2020 02:16 PM